The Tycab Orange 25mm2 Weldflex Single Core cable carries up to 125A through a flexible 25mm² copper core, so you can run welding setups with solid current capacity per metre. The bright orange sheath stands out on the shed floor, making it easier to track your leads around benches and vehicles. The single-core layout keeps polarity simple between the welder and clamps on short or extended runs. This gear uses fine-strand copper at 25mm² inside double insulation, giving you strong performance under typical workshop loads. The outer sheath is orange PVC, built to cope with knocks and scrapes you see in Aussie garages and sheds. The cable is sold per metre, so you cut exactly what your setup needs around utes, trailers or benches. Standard 25mm² lugs and connectors match this cable, so you can plug it straight into common welding equipment.

• Brand: Tycab
• Orange 25mm² Weldflex single core cable
• Rated up to 125A current capacity
• Double insulation for added electrical protection
• Flexible construction for routing around bends
• Bright orange outer sheath for visibility
• Suitable for welding and high-current power runs
• Sold per metre for custom length leads
• Compatible with standard 25mm² lugs and connectors
• Ideal for workshop, shed or vehicle setups

Q: Can I buy this cable in one continuous length?

Yes, the cable is sold per metre in a continuous length. If you order multiple metres, they are supplied as one uncut run where possible. This lets you build longer leads without extra joins. You can then trim and terminate the cable to match your welder, clamps or trailer setup.

Q: What size lugs should I use with this cable?

Use lugs and connectors sized for 25mm² cable. This matches the conductor cross-sectional area and insulation diameter. Correctly sized lugs give better mechanical grip and electrical contact. Undersized or oversized lugs can create hot spots, loose terminations and early cable failure.

Q: Is this cable suitable for general automotive power runs as well as welding?

Yes, this cable can be used for high-current automotive power runs where 25mm² and 125A capacity are appropriate. Many people use similar cable for winches, inverters or battery links. Always match the current rating to the load and run length. Correct circuit protection and routing are still essential for safe setups.

Q: What colour is the insulation on this cable?

The outer sheath on this cable is orange. This colour helps you distinguish welding or high-current runs from other wiring in the shed or vehicle. The high visibility makes it easier to trace circuits during fault finding. It also reduces trip hazards when leads cross work areas.