This Narva sealed rocker switch runs your front diff lock so you can tackle steep clay climbs or boggy ruts without fumbling for loose wiring. The clear front diff lock legend makes sense at a glance when you are bouncing along a track at 40 or 50 kilometres an hour. The compact body fits standard dash switch holes so you can line it up with your other driving light and compressor gear.

Narva builds this sealed rocker switch in a tough plastic housing with metal blade terminals ready for typical 12 or 24 volt diff lock circuits. The sealing around the rocker keeps dust and spray out when you get out there in heavy rain or salt air along the coast. The short throw rocker gives a solid click so you know the diff lock is on before a rocky step or loose hill.

• Narva sealed rocker switch for front diff lock control
• Compact body fits standard automotive dash cut outs
• Sealed design helps keep dust and spray away from contacts
• Suitable for typical 12V and 24V diff lock circuits
• Clear front diff lock legend for quick identification
• Short throw rocker gives positive on off action
• Blade terminals accept common automotive connectors
• Plastic housing built for everyday four wheel drive use
• Suits integration into touring or off road switch panels
• Simple driver seat control for differential lock engagement

Q: Is this switch suitable for use with both 12V and 24V diff lock systems?

Yes, the switch is suitable for both 12V and 24V systems. That means you can run it on typical dual battery touring setups or standard single battery utes. Auto electricians can wire it into existing 12V lockers or 24V truck based systems without needing a different switch body. Just make sure the rest of the circuit components match your vehicle voltage.

Q: Can this sealed rocker switch be mounted in an exterior panel?

It is best suited to interior or sheltered mounting. The sealing helps keep dust and spray out but it is still designed as an automotive dash switch. An interior console or kick panel gives it protection from direct pressure washing. That setup helps the contacts and legend stay in good condition for longer.

Q: Does the switch include illumination for night use?

The switch body is configured to accept illumination. When wired correctly the front diff lock legend can light up with the dash or when the circuit is active. This helps you confirm at a glance if the locker is on during night driving. Ask your auto electrician to connect the illumination terminals during installation.

Q: Can I install this switch myself at home?

Installation should be done by someone confident with automotive wiring. The switch needs correct fusing and relay control to protect the diff lock solenoid and vehicle loom. A professional installer can match wire sizes and terminals to your setup. That approach keeps the gear reliable when you are a long way from help.