This Narva rear end outline marker and rear position lamp runs as a compact red light at the back of your gear with a body size of 101 x 28 x 52 mm. You can hook it up on caravans, box trailers or camper setups that use 12V or 24V globes, so it plays nicely with different tow rigs. ADR approval keeps the rear lighting layout in line with Aussie road rules.

The lens throws a solid red marker from a housing only 28 mm high, so it sits low and out of the way when you load gear. The footprint of 52 mm width suits tight rear panels that already share space with plugs and number plate lights. Standard globe fitment means spares are easy to carry in the toolbox and a simple swap keeps the kit working night after night.

• Narva rear end outline marker and rear position lamp
• Red lens unit for rear mounting
• Compact size: 101 mm L x 28 mm H x 52 mm W
• Suits both 12V and 24V electrical systems
• Uses replaceable globes (not included)
• ADR approved for compliant rear lighting
• Suitable for caravans, trailers and RV setups
• Standard globe fitment simplifies roadside replacements
• Low profile height helps reduce snag risk
• Classified as caravan and trailer lighting gear

Q: Does this Narva rear marker lamp include the 12V or 24V globes?

No, the lamp housing is supplied without globes. This lets you choose 12V or 24V globes to match your existing electrical system. It also means you can pick globe wattage that suits your wiring and lens output needs. Keep a couple of spare matching globes in your kit so a blown globe does not park the trailer.

Q: Can this lamp be used on both caravans and box trailers?

Yes, it can be fitted to caravans, box trailers and similar tow-behind gear where a rear red marker or position lamp is required. The compact 101 x 28 x 52 mm body fits most flat rear panels. As long as the wiring is done correctly, it will work on either 12V or 24V systems. Always mount it where the red light is clearly visible from the rear.

Q: Is this lamp suitable for use on Australian roads?

Yes, the lamp is ADR approved for use as a rear end outline marker and rear position lamp. ADR approval means it meets the Australian Design Rules for lighting performance and colour. When installed correctly with matching globes it forms part of a compliant lighting setup. Check that the lamp location and wiring follow local road regulations.

Q: What maintenance does this lamp typically need?

Maintenance mainly involves checking the globes and keeping the red lens clean. If a globe fails on a 12V or 24V system, you simply replace it with the same type and rating. Wiping dust and road film off the lens helps keep light output consistent. Regular walk-around checks before a trip will usually pick up any issues early.

• Suitable for use as a rear end outline marker and rear position lamp on trailers caravans and similar vehicles where an ADR approved red rear lamp is required
• Operates on 12V or 24V systems when paired with matching globes
• Mounting orientation and hardware will depend on vehicle body layout and existing light cut-outs
• Professional installation is recommended to ensure ADR-compliant wiring and positioning