The Narva Hard Plastic Cover 350A Connectors keeps a mounted 350A connector out of harm’s way when you are sliding tools or recovery boards across a tray or canopy floor. The cover suits heavy duty Anderson style setups that carry high current feeds to winches or rear power sockets and helps keep the contact face clear when the lead is unplugged on the worksite or at camp. A rigid plastic housing sized for 350A shells gives a snug fit over the mounted connector body so it will not rattle around on rough tracks. Non conductive material keeps the metal lugs isolated from loose gear in the back of the ute which matters when you are running 12 or 24 volt systems. Simple clip on use makes this a smart buy if you want your high current connectors to go the distance in Aussie conditions.
- Narva hard plastic protective cover
- Suits mounted heavy duty 350A connectors
- Compatible with Anderson style connector shells
- Hard plastic material resists everyday impacts
- Non conductive housing helps shield contacts
- Intended for fixed panel or bracket installations
- Ideal for high current winch or battery links
- Helps keep connector face clear between uses
- Simple accessory upgrade for existing setups
- Compact design suited to utes trailers and canopies
Q: Does this cover fit standard 350A Anderson style connectors?
Yes, this cover suits mounted 350A heavy duty Anderson style connectors. The housing is shaped to match the body of a typical panel mounted 350A connector. It is not intended for smaller 50A or 175A plugs. Check that your existing connector is a 350A size before ordering so the cover sits correctly on the shell.
Q: Can I use this cover on a loose inline connector?
No, this cover is intended for a mounted connector. The design expects the connector body to be fixed to a panel or bracket so the cover can slide or clip over the exposed face. A free hanging inline connector will not support the cover properly. For loose leads, use a different style of protective boot or dust cover.
Q: Is the hard plastic material suitable for under-bonnet use?
Yes, the hard plastic construction is suitable for typical automotive under-bonnet temperatures. The material is similar to other electrical housings used around engines. It is still good practice to mount the connector and cover away from direct exhaust heat. Avoid placing it directly on engine components where radiant temperatures can be extreme.
Q: Do I need any extra hardware to fit the cover?
No additional hardware is usually required beyond the existing mounted connector. The cover is made to work with the standard shape of a 350A Anderson style shell. Once the connector is bolted to a panel the cover can be placed over the face. Always confirm the cover seats firmly and does not foul any nearby wiring before regular use.
Hard plastic cover suits mounted 350A heavy-duty connectors. Cover is intended for Anderson style high-current connectors fitted in a fixed mounting position. Use with compatible Narva or similar 350A mounted connector bodies only. Installation requires an existing 350A connector already wired into the vehicle or setup.
- Solid cover for 350A connectors
- Tough plastic housing for daily use
- Good protection from loose tray gear
- Smart buy for canopy power setups
- Gear you can count on touring
- Accessory type: hard plastic cover for heavy-duty connector
- Connector rating compatibility: 350A
- Mount style compatibility: mounted connector
- Material: hard plastic housing
- Application: suits heavy-duty Anderson style connectors
- Brand: Narva
- Category: electrical connector accessory
Narva hard plastic cover for mounted 350A connector x 1
| SKU | 57253 |
|---|---|
| Barcode # | 9314464572531 |
| Brand | Narva |
| Shipping Weight | 0.0600kg |
| Shipping Width | 0.050m |
| Shipping Height | 0.110m |
| Shipping Length | 0.150m |
More info
The Narva Hard Plastic Cover 350A Connectors keeps a mounted 350A connector out of harm’s way when you are sliding tools or recovery boards across a tray or canopy floor. The cover suits heavy duty Anderson style setups that carry high current feeds to winches or rear power sockets and helps keep the contact face clear when the lead is unplugged on the worksite or at camp. A rigid plastic housing sized for 350A shells gives a snug fit over the mounted connector body so it will not rattle around on rough tracks. Non conductive material keeps the metal lugs isolated from loose gear in the back of the ute which matters when you are running 12 or 24 volt systems. Simple clip on use makes this a smart buy if you want your high current connectors to go the distance in Aussie conditions.
- Narva hard plastic protective cover
- Suits mounted heavy duty 350A connectors
- Compatible with Anderson style connector shells
- Hard plastic material resists everyday impacts
- Non conductive housing helps shield contacts
- Intended for fixed panel or bracket installations
- Ideal for high current winch or battery links
- Helps keep connector face clear between uses
- Simple accessory upgrade for existing setups
- Compact design suited to utes trailers and canopies
Q: Does this cover fit standard 350A Anderson style connectors?
Yes, this cover suits mounted 350A heavy duty Anderson style connectors. The housing is shaped to match the body of a typical panel mounted 350A connector. It is not intended for smaller 50A or 175A plugs. Check that your existing connector is a 350A size before ordering so the cover sits correctly on the shell.
Q: Can I use this cover on a loose inline connector?
No, this cover is intended for a mounted connector. The design expects the connector body to be fixed to a panel or bracket so the cover can slide or clip over the exposed face. A free hanging inline connector will not support the cover properly. For loose leads, use a different style of protective boot or dust cover.
Q: Is the hard plastic material suitable for under-bonnet use?
Yes, the hard plastic construction is suitable for typical automotive under-bonnet temperatures. The material is similar to other electrical housings used around engines. It is still good practice to mount the connector and cover away from direct exhaust heat. Avoid placing it directly on engine components where radiant temperatures can be extreme.
Q: Do I need any extra hardware to fit the cover?
No additional hardware is usually required beyond the existing mounted connector. The cover is made to work with the standard shape of a 350A Anderson style shell. Once the connector is bolted to a panel the cover can be placed over the face. Always confirm the cover seats firmly and does not foul any nearby wiring before regular use.
Hard plastic cover suits mounted 350A heavy-duty connectors. Cover is intended for Anderson style high-current connectors fitted in a fixed mounting position. Use with compatible Narva or similar 350A mounted connector bodies only. Installation requires an existing 350A connector already wired into the vehicle or setup.
- Solid cover for 350A connectors
- Tough plastic housing for daily use
- Good protection from loose tray gear
- Smart buy for canopy power setups
- Gear you can count on touring
- Accessory type: hard plastic cover for heavy-duty connector
- Connector rating compatibility: 350A
- Mount style compatibility: mounted connector
- Material: hard plastic housing
- Application: suits heavy-duty Anderson style connectors
- Brand: Narva
- Category: electrical connector accessory
Narva hard plastic cover for mounted 350A connector x 1
| SKU | 57253 |
|---|---|
| Barcode # | 9314464572531 |
| Brand | Narva |
| Shipping Weight | 0.0600kg |
| Shipping Width | 0.050m |
| Shipping Height | 0.110m |
| Shipping Length | 0.150m |
