Narva 12 Volt 13 Pin Euro Round Plastic Trailer Socket gives you a standard Euro style hook-up for any trailer that runs a 13-pin plug. Each pole is rated to 25A at 12V, so it handles normal lighting loads and extra circuits without drama. The round footprint lines up with common Euro mounts, which makes it a smart buy when you want a straight swap on an imported camper or caravan.

The body uses a plastic housing that shrugs off road spray and coastal air better than untreated metal in Aussie conditions. Compliance with ECE standard ISO 11 446 means the pin layout and electrical performance match other Euro-spec gear, so you can tow different trailers without rewiring. The protective lid shields the 13-pin face from dust between trips, helping the contacts stay clean so the lights work when you hook up and get out there.

• 12 volt Narva Euro round trailer socket
• 13-pin configuration for multi-circuit trailers
• Amp rating per pole: 25A at 12V
• Plastic housing helps resist corrosion
• Complies with ECE ISO 11 446 standard
• Suits Euro style 13-pin trailer plugs
• Hinged cap protects contact face from debris
• Compact round body for easy vehicle mounting
• Ideal for lighting and auxiliary 12V circuits

Q: What trailer plugs is this socket compatible with?

It is compatible with 13-pin Euro round trailer plugs that follow ISO 11 446. This standard sets the pin layout and basic performance, so any matching Euro 13-pin plug will mate correctly. If your trailer plug body is marked as 13-pin and Euro or ISO 11 446, it will physically fit this socket. Always confirm that both sides of the setup run on 12 volt systems.

Q: Can this socket handle auxiliary circuits as well as lights?

Yes, each pole is rated to 25A at 12V. That rating covers normal stop, tail and indicator lighting circuits with plenty of headroom. It also leaves capacity for extra trailer functions within the 25A limit, as long as the wiring and fuses are sized correctly. Keep total load per pole under that rating to avoid overheating and voltage drop.

Q: Is this socket suitable for mounting on the tow vehicle?

Yes, it is intended to mount on the vehicle side of the trailer connection. The plastic housing and hinged cap are shaped for external body or bar mounting. It forms the fixed connection point where the trailer plug mates when you hook up. Make sure you mount it in a position that avoids direct impact and allows the lid to open fully.

Q: Does the plastic housing affect electrical performance?

No, the plastic housing only supports and protects the internal contacts. The actual current path runs through metal pins inside the socket face. The plastic body helps resist corrosion and road grime without carrying any current itself. That combination keeps the contact area secure while cutting down on external rust on the body.