If you want a clean gas hookup point on the van this Coast to Coast Male Bayonet Socket 1/4 BSP BYN-014 keeps things simple with a threaded 1/4 inch BSP nipple ready for a standard hose. The bayonet outlet gives your gas fitter a clear spot to plug in a barbecue line so you can get out there and cook without juggling loose hoses around the bottle tap every time.
The metal body and threaded 1/4 inch BSP connection line up with common gas hose unions used across Australian caravan setups so replacement hoses stay straightforward. The compact housing bolts onto a solid surface and leaves the bayonet and nipple exposed for direct access while the rest of the gas gear sits tucked away. For anyone building or refreshing a gas setup on a van this is a smart buy that just does its job.
- Coast to Coast male bayonet socket for gas systems
- Includes 1/4" BSP male nipple for hose attachment
- Suits standard gas hose with compatible female union fittings
- Provides fixed bayonet outlet point on caravan or RV
- Metal construction for solid everyday use
- Compact form factor for neat wall or panel mounting
- Intended for use as part of gas accessory setups
- Compatible with Australian style 1/4" BSP gas connections
- Ideal for external barbecue or outdoor kitchen gas points
- Must be installed and commissioned by a licensed gas fitter
Q: Can this bayonet socket be used as the main isolation point for a gas system?
No, this bayonet socket is not an isolation valve. It serves as a connection point for a gas hose and still requires upstream isolation using approved gas cocks or regulators. A licensed gas fitter will normally place a shutoff tap near the cylinder or manifold. Always turn the gas off at the cylinder when the hose is disconnected.
Q: Does this socket fit any gas hose with a 1/4" BSP female union?
It fits hoses that use a matching 1/4" BSP female connector. Gas hose unions are standardised but should always be checked before installation. If the female fitting is worn or damaged it should be replaced rather than forced onto the nipple. A gas fitter can confirm compatibility before commissioning the system.
Q: Is this bayonet socket suitable for mounting inside a gas locker?
It can be mounted where regulations allow a bayonet outlet. Placement inside a gas locker must comply with current gas codes regarding ventilation and access. Many installers position bayonet outlets on an exterior wall near the cooking area instead. Always follow advice from a licensed gas fitter on the safest location.
Q: Can I install this bayonet socket myself on my caravan?
Installation must be carried out by a licensed gas fitter. Gas work on caravans and RVs is regulated across all Australian states. A qualified tradesperson will pressure test the system after fitting the socket. This protects both compliance and safety for anyone using the gas gear on the trip.
This male bayonet socket suits standard gas hoses that use a compatible female union fitting on a 1/4" BSP thread. The socket is intended for fixed mounting where a bayonet gas outlet is required such as external barbecue points on caravans and RVs. Installation must follow Australian gas regulations and be carried out by a licensed gas fitter. The gas hose connects by screwing the female union fitting onto the 1/4" BSP male nipple.
- 1/4" BSP thread matches common hoses
- Bayonet socket keeps BBQ point tidy
- Metal construction handles regular touring
- Simple bit of gear that just works
- Smart buy for caravan gas setups
- Brand: Coast to Coast
- Type: Male bayonet socket
- Gas category: Gas accessories
- Connection thread: 1/4" BSP male nipple
- Hose connection: Suits standard gas hose with compatible female union fittings
- Primary use: Screw-on attachment point for gas hose bayonet connection
- 1 x Coast to Coast male bayonet socket with 1/4" BSP male nipple
| SKU | 550-00712_033800 |
|---|---|
| Barcode # | 550-00712_033800 |
| Brand | Coast to Coast |
| Shipping Weight | 0.1500kg |
More infoMake 4 payments of $5.75 over 8 weeks and get it now!
Calculate Shipping
If you want a clean gas hookup point on the van this Coast to Coast Male Bayonet Socket 1/4 BSP BYN-014 keeps things simple with a threaded 1/4 inch BSP nipple ready for a standard hose. The bayonet outlet gives your gas fitter a clear spot to plug in a barbecue line so you can get out there and cook without juggling loose hoses around the bottle tap every time.
The metal body and threaded 1/4 inch BSP connection line up with common gas hose unions used across Australian caravan setups so replacement hoses stay straightforward. The compact housing bolts onto a solid surface and leaves the bayonet and nipple exposed for direct access while the rest of the gas gear sits tucked away. For anyone building or refreshing a gas setup on a van this is a smart buy that just does its job.
- Coast to Coast male bayonet socket for gas systems
- Includes 1/4" BSP male nipple for hose attachment
- Suits standard gas hose with compatible female union fittings
- Provides fixed bayonet outlet point on caravan or RV
- Metal construction for solid everyday use
- Compact form factor for neat wall or panel mounting
- Intended for use as part of gas accessory setups
- Compatible with Australian style 1/4" BSP gas connections
- Ideal for external barbecue or outdoor kitchen gas points
- Must be installed and commissioned by a licensed gas fitter
Q: Can this bayonet socket be used as the main isolation point for a gas system?
No, this bayonet socket is not an isolation valve. It serves as a connection point for a gas hose and still requires upstream isolation using approved gas cocks or regulators. A licensed gas fitter will normally place a shutoff tap near the cylinder or manifold. Always turn the gas off at the cylinder when the hose is disconnected.
Q: Does this socket fit any gas hose with a 1/4" BSP female union?
It fits hoses that use a matching 1/4" BSP female connector. Gas hose unions are standardised but should always be checked before installation. If the female fitting is worn or damaged it should be replaced rather than forced onto the nipple. A gas fitter can confirm compatibility before commissioning the system.
Q: Is this bayonet socket suitable for mounting inside a gas locker?
It can be mounted where regulations allow a bayonet outlet. Placement inside a gas locker must comply with current gas codes regarding ventilation and access. Many installers position bayonet outlets on an exterior wall near the cooking area instead. Always follow advice from a licensed gas fitter on the safest location.
Q: Can I install this bayonet socket myself on my caravan?
Installation must be carried out by a licensed gas fitter. Gas work on caravans and RVs is regulated across all Australian states. A qualified tradesperson will pressure test the system after fitting the socket. This protects both compliance and safety for anyone using the gas gear on the trip.
This male bayonet socket suits standard gas hoses that use a compatible female union fitting on a 1/4" BSP thread. The socket is intended for fixed mounting where a bayonet gas outlet is required such as external barbecue points on caravans and RVs. Installation must follow Australian gas regulations and be carried out by a licensed gas fitter. The gas hose connects by screwing the female union fitting onto the 1/4" BSP male nipple.
- 1/4" BSP thread matches common hoses
- Bayonet socket keeps BBQ point tidy
- Metal construction handles regular touring
- Simple bit of gear that just works
- Smart buy for caravan gas setups
- Brand: Coast to Coast
- Type: Male bayonet socket
- Gas category: Gas accessories
- Connection thread: 1/4" BSP male nipple
- Hose connection: Suits standard gas hose with compatible female union fittings
- Primary use: Screw-on attachment point for gas hose bayonet connection
- 1 x Coast to Coast male bayonet socket with 1/4" BSP male nipple
| SKU | 550-00712_033800 |
|---|---|
| Barcode # | 550-00712_033800 |
| Brand | Coast to Coast |
| Shipping Weight | 0.1500kg |
