This Lightforce Replacement HID Bulb in 70W 5000K slots into XGT housings that use an external ballast so you can keep your existing driving light setup and get out there after dark again. The 70W rating lines up with common touring looms so your wiring and fuses stay within their original load. The 5000K colour keeps the beam clean and white for long country stretches and gravel backroads. The HID capsule runs at 70W through the matched external ballast which keeps start up and running current where the XGT kit expects it. The 5000K output avoids the blue look of higher Kelvin globes and stays practical for dust haze and light rain. Lightforce builds this globe to suit the XGT reflector and shield so the beam pattern stays tight and useful. It is a smart buy if your old XGT HID globe has faded or failed.

• Genuine Lightforce replacement HID bulb
• Suits XGT driving lights with external ballast
• 70W power rating for strong output
• 5000K colour temperature for white beam
• HID globe type for high intensity light
• Direct replacement for failed original globe
• Maintains existing XGT wiring and fuse loads
• Compatible with Lightforce external ballast assemblies
• Ideal for restoring night driving performance
• Suitable for touring and off-road lighting setups

Q: Is this HID bulb sold as a single globe or a pair?

This replacement HID bulb is supplied as a single globe. That suits you if only one XGT light has failed and you just want to get it working again. Some drivers still choose to buy two so both sides match in age and output. If you want a matched pair for a fresh setup you will need to order two globes.

Q: Does this bulb include the external ballast or wiring loom?

No, this part is only the HID bulb to suit existing XGT external ballast assemblies. You will need to already have a working Lightforce ballast and loom for the bulb to operate. If your ballast or wiring has failed you will need the appropriate Lightforce kit or replacement parts. Always check connections and mounting before powering up.

Q: Can this 70W 5000K bulb be used in non Lightforce housings?

This bulb is specified to suit Lightforce XGT housings with the matching external ballast. Other housings may not support the capsule position or mounting style which can affect beam shape and reliability. For non Lightforce lights it is best to use the globe type and wattage recommended by that manufacturer. Correct matching avoids heat and focus issues over time.

Q: Do I need to change my vehicle fuses when fitting this globe?

You generally use the same fuse rating that already protects your 70W XGT HID circuit. The replacement bulb draws a similar load to the original globe when run through a suitable ballast. If someone has modified the loom or fuse size before you it is worth comparing against Lightforce wiring diagrams. Correct fusing protects the loom and helps avoid electrical faults on longer trips.

This replacement HID bulb suits Lightforce XGT driving lights that use an external ballast assembly. It is a direct replacement for the original 70W 5000K HID globe supplied with compatible Lightforce XGT kits. Fitment requires an existing Lightforce XGT housing and matching external ballast. Always follow Lightforce installation instructions and disconnect power before replacing the globe.