This Lenco Stainless Steel Slide Bracket hooks up with any Lenco 12-Volt or 24-Volt Hatch Lift so you can lift deck hatches and engine covers without dodgy homemade hardware. The stainless slide takes the load from the actuator and passes it into the hatch frame, keeping the ram tracking straight through its full stroke length every time you raise or drop a cover.

The bracket is built from stainless steel, so it holds up to spray, washdowns and salt air on boats that live outside year-round. The slide profile is matched to Lenco Hatch Lift pin size and travel, which means less mucking about during fitment and fewer alignment dramas later. Clamshell packaging keeps the bracket tidy in the spares box until the next job. For anyone setting up genuine Lenco gear, this bracket is a smart buy that keeps the whole system working as intended.

• Stainless steel slide bracket construction for marine use
• Compatible with all Lenco 12-Volt Hatch Lifts
• Compatible with all Lenco 24-Volt Hatch Lifts
• Provides guided slide point for hatch actuators
• Helps keep hatch lift travel straight and smooth
• Ideal as a replacement for worn brackets
• Supplied in protective clamshell style packaging
• Genuine Lenco accessory for hatch lift systems
• Suits deck hatches and engine bay covers
• Compact spare part for onboard maintenance kits

Q: Does this slide bracket fit all Lenco Hatch Lifts?

Yes, this stainless steel slide bracket is made for use with all Lenco 12-Volt and 24-Volt Hatch Lifts. That means you can pair it with any standard Lenco hatch actuator already on your boat. It is a good option if your original slide has worn out or gone missing. Keeping a spare in the kit can also help avoid downtime on longer trips.

Q: Is the bracket suitable for use in saltwater environments?

Yes, the bracket is made from stainless steel for marine use. Stainless handles constant spray and washdowns much better than mild steel fittings. It also helps reduce rust staining on surrounding gelcoat or paint. For best results, give the bracket a rinse with fresh water after each trip.

Q: Is any hardware or fasteners included with this bracket?

No, only the stainless steel slide bracket itself is included in the clamshell pack. You can match the correct bolts or screws to your specific hatch frame and substrate. Using suitable marine-grade fasteners will help the bracket perform properly. Always follow Lenco’s hatch lift mounting guidelines.

Q: Can I install this bracket myself or do I need a marine technician?

You can install the bracket yourself if you are confident working with hatch hardware and follow the Lenco instructions. The slide needs to be aligned with the hatch lift ram for smooth operation. If you are unsure about mounting positions or loads, a marine technician can set it up correctly. Good alignment helps the actuator last longer and prevents binding.

Bracket is used in conjunction with all Lenco 12-Volt and 24-Volt Hatch Lifts to complete the lift mounting setup on suitable marine hatches. Installation position and hardware selection should follow the specific Lenco Hatch Lift instructions supplied with the lift kit. Use only on hatches and structures rated for the loads of the selected Lenco Hatch Lift model. Marine installers typically mount the slide bracket to a solid hatch frame or coaming surface.