This Coast to Coast large battery box keeps your loose battery in one solid bit of gear with external dimensions of 188 x 328 x 195 mm. You drop the battery in, clip on the lid and run the included strap over the top so it stays put on the trailer or tinny when tracks and chop get rough. The footprint of 328 x 188 mm fits cleanly on common battery trays and flat alloy floors.

The hard case and lid give the battery a simple shell around that 195 mm overall height, so nothing flexes or cuts into the casing. The strap runs full length over the top, pulling tight along the 328 mm body for even hold. The straight sides make it a smart buy for standard battery setups across caravans, boats and campers where you want gear that just fits and lets you get out there.

• Large battery box for housing a single battery
• External dimensions 188 mm (W) x 328 mm (L) x 195 mm (H)
• Supplied with removable lid for battery access
• Includes strap to secure lid and battery together
• Helps keep battery safe and contained in use
• Suits mounting on flat decks, trays and floors
• Straight side walls for stable, flat seating
• Simple design for marine, caravan and trailer setups
• Hard case protects battery from loose gear around it

Q: Does this battery box include the securing strap?

Yes, the battery box includes a strap. The strap runs over the lid and down each side of the box. This lets you tension it around the full 328 mm length so the battery stays seated. It also helps keep the lid in place when the trailer or boat is moving over rough ground or chop.

Q: Will this fit on a standard battery tray in a boat or trailer?

It will fit trays that match its footprint. The external dimensions are 188 mm wide and 328 mm long, so any tray needs at least that space clear. Always measure your existing mount or platform before buying. That check helps avoid overhang and keeps the box fully supported.

Q: Is the lid removable for access to terminals?

Yes, the lid is removable. You simply release the strap and lift the lid off to access the battery posts. This makes it straightforward to connect or disconnect cables. Once you are done, refit the lid and re-tension the strap so the case closes firmly again.

Q: Can this box be bolted down through the base?

The description does not state pre-formed mounting holes. Many users place the box onto an existing tray or flat surface and then strap it down. If you plan to drill mounting points, check the wall thickness and battery clearance first. Careful mounting prevents damage to the case or the battery shell.