This Krimped Anderson Plug Replacement Terminals 20 pack steps in when factory contacts on a 50A Anderson plug start to loosen or pit. You match these straight into standard Anderson style housings that already run 6 AWG or 6 B&S cable on a 12V setup. With a current rating of 50A and insulation up to 600V they suit common dual battery lines feeding fridges lights and tow wiring.

Each terminal is built from non corrosive high quality metal so it holds up to spray and dust on coastal tracks and dry gravel roads over 100 km runs. The barrel is sized for 6 AWG and 6 B&S which keeps cable strands tight and contact resistance low on steady loads around 30A. A bag of 20 is a smart buy for the kit so you can tackle on the spot repairs without hunting for parts mid trip.

• Replacement cable terminals for 50A Anderson style plugs
• Suits standard 50A Anderson plug housings
• Compatible with 6 AWG cable sizes
• Also suits common 6 B&S automotive cable
• Rated for electrical systems up to 600V
• Non corrosive high quality metal construction
• Pack includes 20 individual terminals
• Ideal for dual battery and trailer wiring maintenance
• Handy spare set for touring and workshop kits
• Supports solid crimps for reliable power connections

Q: Do these terminals fit all standard 50A Anderson style plugs?

Yes, these terminals suit standard 50A Anderson style plugs. They are made to match the common 50A housings used in most 12V setups. As long as your connector is a 50A Anderson style body they will slot in correctly. Always check the plug body for 50A markings before swapping parts.

Q: What cable size can I crimp into these Krimped terminals?

These terminals suit 6 AWG and 6 B&S cable. That covers most heavy charge and accessory runs on touring vehicles. Using the correct cable size helps maintain solid contact and keeps resistance low. Undersized or oversized cable can lead to poor crimps and unreliable power.

Q: Are these Anderson plug terminals suitable for higher voltage applications?

The terminals are rated up to 600V. That rating covers typical 12V and 24V automotive circuits and many low voltage workshop setups. Always ensure the rest of your wiring and plugs share equal or higher ratings. Voltage rating does not replace the need for correct fusing and circuit protection.

Q: How many connectors can I service with one 20 pack?

A standard 50A Anderson plug uses two terminals. With 20 terminals in the pack you can fully re‑terminate up to ten plugs. Keeping the extras in your kit gives you spares for on‑road repairs. Many users keep a few pre‑crimped leads ready for fast swaps.

• Suits 50A Anderson style plugs using 6 AWG or 6 B&S cable