The Koyorad JR2269J radiator slots straight into Toyota Hiace SR40 and SDV Townace SBV vans from 1997 to 2003 and keeps the cooling system under control with a 425 mm high core that matches the factory footprint. A 678 mm width and 16 mm thickness give enough surface area to tackle long climbs and city traffic without the temp needle creeping where it should not.

The tanks and side frames are built tough around that 425 mm by 678 mm core, so the kit handles corrugations and daily work use without flex. Neck diameters of 31 mm on both inlet and outlet suit existing hoses, which keeps the setup simple for DIY or workshop installs. With an integrated transmission cooler and spec-matched dimensions, this is a smart buy for keeping older Hiace and Townace rigs doing the rounds.

• Suits Toyota Hiace SR40 manual 1997–2003
• Suits Toyota SDV Townace SBV manual 1997–2003
• Core dimensions 425 mm high x 678 mm wide
• Core thickness 16 mm for balanced cooling
• 31 mm inlet diameter for OE hose fit
• 31 mm outlet diameter for OE hose fit
• Integrated transmission cooler ports on tank
• Direct-style replacement radiator assembly JR2269J
• Built tough for work vans and tourers
• Suitable for everyday driving and towing loads

Q: Does this radiator fit automatic transmission models?

No, this radiator suits manual transmission models only. The hose and cooler port layout is matched to the manual Toyota Hiace SR40 and SDV Townace SBV from 1997–2003. Automatic models often use different cooler arrangements and mounting positions. Always confirm your transmission type before ordering to avoid fitment issues.

Q: Do I need new hoses when fitting this radiator?

Not necessarily, as the inlet and outlet diameters are 31 mm to match factory hoses. However, many older Hiace and Townace vans have softened or cracked hoses. Replacing them at the same time as the radiator is a smart move for reliability. A cooling system refresh with new clamps and coolant reduces the chance of future leaks.

Q: Is the transmission cooler built into this radiator?

Yes, this radiator includes an integrated transmission cooler section. The cooler sits inside the tank and uses dedicated ports for the transmission lines. This keeps the install tidy and close to factory layout. Always flush the cooler lines and use new sealing washers where required.

Q: What coolant should I run with this radiator?

Use a coolant type and mix ratio that meets Toyota specifications for your Hiace or Townace model. Sticking with the correct type protects alloy and steel surfaces inside the radiator and engine. Always flush the old coolant out before filling the new unit. Follow the vehicle workshop manual for bleed procedures and capacity.

• Suits Toyota Hiace SR40 manual 1997–2003
• Suits Toyota SDV Townace SBV manual 1997–2003
• Suits manual transmission models only
• Includes integrated transmission cooler connections
• Professional installation recommended for correct coolant and hose setup