This Koyorad radiator drops into Subaru Outback BR 2.0L models from 2009 to 2015 so you can tackle climbs without watching the temp gauge. The core stands at 340 mm high and 686 mm wide so there is plenty of face area for slow gravel work or highway towing. An internal transmission cooler section keeps the auto oil under control on long hauls while still working fine with manual models.

The 25 mm core thickness gives solid flow without choking the water pump so the engine stays in its comfort zone. Twin 28 mm inlets and a 39 mm outlet line up with factory hoses so you are not chasing odd fittings. The tanks and core match OE style dimensions which makes this a smart buy when the original unit is tired or blocked. Bolt it in and get out there again without fuss.

• Direct replacement radiator for Subaru Outback BR 2.0L diesel (2009–2015)
• Suits both automatic and manual transmission variants
• Core height of 340 mm for factory-style fit
• Core width of 686 mm to maximise cooling face area
• Core thickness of 25 mm for balanced flow and heat transfer
• Twin 28 mm inlet connections to suit original hoses
• 39 mm outlet neck compatible with factory lower hose
• Integrated transmission cooler section for automatic models
• Koyorad brand radiator built for reliable engine temperature control
• Suited to towing and touring use within vehicle limits

Q: Does this radiator fit all Subaru Outback BR 2.0L diesel models from 2009 to 2015?

Yes, it is listed for Subaru Outback BR 2.0L turbo‑diesel models built between 2009 and 2015. That covers the BR chassis code across those years. It is suited to both automatic and manual transmission variants. Always confirm your engine size and build year against your compliance plate before ordering.

Q: Is there an integrated transmission cooler in this radiator?

Yes, this radiator includes an internal transmission cooler section. That cooler is intended for models that run an automatic transmission. Manual transmission vehicles can still use the same core with the cooler ports capped as per standard practice. Reuse or replace the cooler line fittings as required during installation.

Q: What are the core dimensions of this radiator?

The core height is 340 mm, width is 686 mm, and thickness is 25 mm. These measurements refer to the finned core area only, not overall tank size. Matching these figures to your original unit helps confirm compatibility. Measuring the old radiator before removal can give added peace of mind.

Q: Do I need new radiator hoses to use this unit?

The radiator uses twin 28 mm inlets and a 39 mm outlet that match factory hose sizing. If your existing hoses are in good condition and not swollen or cracked, they can usually be reused. Many mechanics still recommend replacing aged hoses while the system is open. Fresh clamps and coolant are also commonly fitted at the same time.

• Suits Subaru Outback BR 2.0L turbo‑diesel models built 2009–2015
• Compatible with both automatic and manual transmission variants
• Direct replacement radiator matching factory core dimensions
• Includes provision for integrated transmission cooler where required by vehicle specification