The Koyorad JR6999J radiator steps straight into Subaru Liberty BN and Outback BS 2.5L autos from 12/2014-on, taking over from tired factory cooling gear without drama. With a core measuring about 340 mm high and 713 mm wide, it gives the engine enough frontal area to hold temperature on long climbs or when the cabin is loaded. A built-in transmission cooler keeps the auto fluid under control while you tackle highway kilometres.

The alloy core and plastic tank setup keeps weight reasonable while still coping with day to day Australian temps that often sit above 30°C. Core thickness sits at 16 mm to match the stock fan and shroud spacing, so airflow does what it should at low speed. Inlet and outlet diameters of 40 mm match the factory hoses, which makes this a smart buy when you want gear that simply fits and works with existing hardware.

• Direct replacement radiator for Subaru Liberty BN 2.5L automatic from 12/2014-on
• Also suits Subaru Outback BS 2.5L automatic from 12/2014-on
• Core height of 340 mm for stable airflow coverage
• Core width of 713 mm to match factory support panel
• Core thickness of 16 mm maintains fan and shroud clearance
• 40 mm inlet diameter matches original upper hose
• 40 mm outlet diameter matches original lower hose
• Integrated transmission cooler for automatic gearbox fluid
• Alloy core with plastic end tanks as per typical OEM style
• Suited to touring, commuting and towing within vehicle limits

Q: Does this radiator suit manual transmission models?

This radiator is specified for automatic transmission models. The built-in transmission cooler is intended for autos and is not required on manuals. Manual models may use a different part number and hose routing. Always cross-check against your VIN before ordering.

Q: Do I need new hoses and clamps with this radiator?

You can reuse hoses and clamps if they are in good condition. However many workshop jobs include fresh hoses and quality clamps at the same time. New rubber helps reduce the chance of leaks on older touring setups. A quick inspection for cracks or swelling will guide the decision.

Q: Is coolant included with the radiator?

Coolant is not supplied with this radiator. You will need to source the correct coolant type specified for Subaru Liberty and Outback 2.5L engines. Fresh coolant mixed to the right ratio protects alloy components. Always bleed the system properly after filling.

• Direct-fit radiator for Subaru Liberty BN 2.5L automatic (12/2014-on)
• Suits Subaru Outback BS 2.5L automatic (12/2014-on)
• Includes built-in transmission cooler for auto models
• Professional installation recommended to ensure correct coolant level and hose routing
• Use with correct Subaru-spec coolant and existing factory hoses where serviceable