This Koyorad radiator steps straight into Ranger PX, Mazda BT50 and UA Everest setups running the 3.2 L engine from 2011 on. You get a core that stands 605 mm high and 643 mm wide so it fills the factory opening and keeps temps in check when you tow or sit in traffic. Hose connections sized to 35 mm inlet and 32 mm outlet help keep swaps tidy in the shed. Koyorad backs this gear with a core thickness of 25 mm which balances airflow and cooling across Australian summers. Breather ports at 8 mm and 22 mm line up with standard plumbing so you can bleed the system properly after a long-day service. An integrated transmission cooler keeps auto and manual drivetrains in the zone when you load up. For the price this radiator is a smart buy for touring and work rigs that need to get out there and back again.

• Suits Ford Ranger PX 3.2L from 2011-on
• Suits Mazda BT50 3.2L from 2011-on
• Suits Ford Everest UA 3.2L from 2015-on
• Core height of 605 mm for strong frontal coverage
• Core width of 643 mm to fill factory opening
• Core thickness of 25 mm for balanced cooling and airflow
• 35 mm inlet and 32 mm outlet hose connections
• Dual breather ports sized 8 mm and 22 mm
• Integrated transmission cooler within radiator tank
• Direct replacement-style radiator for A/T and M/T setups

Q: Does this radiator include an integrated transmission cooler?

Yes, this radiator includes an integrated transmission cooler. This means the cooler sits inside the radiator tank and uses coolant flow to manage transmission fluid temperature. It suits automatic vehicles that route transmission lines through the radiator. Manual models that share the same core design can also use it without issue.

Q: What are the exact core dimensions of this radiator?

The core measures 605 mm high, 643 mm wide and 25 mm thick. These measurements refer to the finned core area only, not the end tanks or mounting brackets. Measuring your existing radiator core with a tape before ordering helps confirm compatibility. Matching height, width and thickness supports correct fan shroud and mount alignment.

Q: What size are the inlet and outlet hose connections?

The inlet diameter is 35 mm and the outlet diameter is 32 mm. These sizes are important when checking your upper and lower radiator hoses. If your current hoses match these internal diameters the new unit should clamp up with standard hose clamps. Always inspect hose condition and replace if swollen, cracked or too soft.

Q: Which engines and years does this radiator suit?

This radiator is specified for 3.2L Ford Ranger PX, Mazda BT50 and Ford Everest UA from 2011-onwards, including 2015-on Everest. Staying within those engine and model years keeps mounting points, hose locations and cooler fittings aligned. If your vehicle is heavily modified always compare physical measurements. When in doubt, confirm fitment with your mechanic using the JR3052J part code.

Suitable for Ford Ranger PX 3.2L models from 2011-on. Suitable for Mazda BT50 3.2L models from 2011-on. Suitable for Ford Everest UA 3.2L models from 2015-on. Suits both automatic and manual transmission variants where a transmission cooler is required. Always compare core dimensions of 605 mm height by 643 mm width by 25 mm thickness and hose diameters of 35 mm inlet and 32 mm outlet with the original radiator before installation. Professional installation is recommended to ensure correct hose routing and cooler line connection.