This Koyorad radiator slots into Nissan X-Trail T30 models with a 2.5L petrol engine and keeps things in check when you get out there. A core height of 450 mm and width of 686 mm line up with factory mounts so the gear goes in without chasing odd brackets. A 16 mm thick core handles daily commuting and weekend tracks while 35 mm inlet and outlet necks match the original hoses.

The aluminium core and plastic tanks keep the setup light while still pushing coolant across that full 450 mm by 686 mm face. An external transmission cooler layout takes the heat load away from the main core which helps when you tackle long climbs or tow. Fitment suits both auto and manual X-Trail T30 models built from 09/2007 on so it is a smart buy when the old radiator starts to seep.

• Direct replacement radiator for Nissan X-Trail T30
• Suits 2.5L petrol engines built from 09/2007-on
• Compatible with both automatic and manual transmissions
• Core height of 450 mm for factory-style coverage
• Core width of 686 mm to match original shroud
• Slim 16 mm core thickness for fan and accessory clearance
• 35 mm inlet and outlet necks suit OEM hoses
• Layout supports use of an external transmission cooler
• Lightweight aluminium core with plastic tank construction
• Koyorad branded radiator for touring and daily use

Q: Does this radiator suit both automatic and manual Nissan X-Trail T30 models?

Yes, it suits both automatic and manual 2.5L petrol T30 models from 09/2007 onwards. The core dimensions and hose neck sizes match the shared factory layout. The unit works with vehicles that use an external transmission cooler. Always confirm your build date and engine type before ordering.

Q: What measurements should I check against my original radiator before buying?

Check core height, width, thickness and hose neck diameters. This radiator uses a 450 mm high, 686 mm wide and 16 mm thick core. The inlet and outlet necks are 35 mm diameter. Matching these numbers against your old unit helps confirm correct fitment.

Q: Can this radiator be used with an existing external transmission cooler?

Yes, the design allows use with an external transmission cooler. The trans cooler is not built into the main tank which suits setups already running a separate cooler. This keeps gearbox heat away from the main coolant circuit. It is a common approach for towing and hot climates.

Q: Is professional installation recommended for this radiator?

Professional installation is recommended. A mechanic can pressure test the system, bleed air correctly and inspect hoses and clamps at the same time. Correct fitment helps the 450 mm by 686 mm core work as intended. It also reduces the chance of leaks after the job.

Suitable for Nissan X-Trail T30 2.5L petrol models built from 09/2007 onwards with automatic or manual transmissions. Radiator suits vehicles that use an external transmission cooler. Confirm core dimensions of 450 mm height, 686 mm width and 16 mm thickness against the original radiator before installation. Professional installation is recommended to ensure correct hose routing and coolant fill.