This Jayrad radiator steps in when the factory Amarok unit starts struggling with heat on long tows or steep climbs. The core height of 615 mm and width of 588 mm match the 3.0L V6 turbo diesel DDXC layout, so you keep the right cooling footprint across the grille. A built-in transmission cooler helps the auto hold its temperature once you start hauling serious weight behind the towbar. The 22 mm core thickness, 38 mm inlet, and 38 mm outlet are all set up around the standard Volkswagen hose sizes, so the cooling flow stays where it should. The 8 mm breather port helps the system manage pressure as temps swing from cold starts to 90°C operating heat. If your Amarok 2H runs between 2016 and 2022 with the DDXC engine, this is smart buy replacement gear for real Aussie conditions.

• Suits Volkswagen Amarok 2H models built from 09/2016 to 07/2022
• Compatible with 3.0L V6 turbo diesel DDXC engine only
• Core height measures 615 mm for ample cooling area
• Core width measures 588 mm to suit factory shroud
• Core thickness of 22 mm balances coolant volume and airflow
• Inlet and outlet hose diameters are both 38 mm
• Breather port diameter is 8 mm for pressure control
• Includes provision for an integrated transmission cooler
• Direct-style replacement layout for original radiator dimensions
• Suitable for towing and touring use in Australian conditions

Q: Does this radiator fit all Volkswagen Amarok 3.0L V6 models?

No, it only fits Amarok 2H models with the DDXC engine code from 09/2016 to 07/2022. Always check the engine code on the compliance plate or engine label before ordering. Different engine codes can use different radiator layouts and hose positions. Using the wrong unit can cause hose misalignment and poor cooling performance.

Q: Does this radiator include a built-in transmission cooler?

Yes, this radiator includes provision for a transmission cooler. The cooler section runs transmission fluid through a separate internal path within the tank. This helps the auto maintain operating temperature during towing and loaded driving. After installation, the transmission lines should be checked for secure fittings and leaks.

Q: Can I install this radiator at home with basic tools?

It is possible, but professional installation is recommended. Radiator replacement involves draining coolant, removing shrouds, and correctly bleeding air from the system. Incorrect fitment can lead to overheating or leaks at the 38 mm hose connections. A workshop will also pressure test the system after fitment.

Q: How do I confirm the dimensions match my existing radiator?

Measure the core height, width, and thickness of the existing unit. This radiator has a 615 mm core height, 588 mm core width, and 22 mm core thickness. Also confirm the 38 mm inlet and outlet diameters and 8 mm breather port size. Matching these measurements reduces the risk of clearance or hose routing issues.

Suitable for Volkswagen Amarok 2H models built between September 2016 and July 2022 with the 3.0L V6 Turbo Diesel DDXC engine only. Check engine code DDXC on the vehicle compliance or engine plate before ordering. Match core dimensions of 615 mm height and 588 mm width with the existing radiator for confirmation. Professional installation is recommended to ensure correct coolant level and hose alignment. Transmission cooler connections must be checked for leaks after fitment.