This Jayrad radiator drops straight into Suzuki Vitara V6 2.0L autos from 1994-on and takes over cooling with a core that measures 425 mm high and 527 mm wide. You get proper coverage across the grille so the fan and airflow can actually do their job when you crawl in low range or sit on 100 km/h with a load on the back. The 27 mm thick core and built-in auto trans cooler help keep temps steady on long hauls. Jayrad sticks with an alloy core and plastic tanks on this setup to keep weight down while still moving plenty of heat. The 34 mm inlet and outlet suit the standard Vitara hoses so you are not chasing odd sizes or adapters. That means the coolant path stays as Suzuki intended, just with fresh gear that has not seen decades of corrosion. For an older V6 that still gets out there, this is a smart buy to keep the cooling system in shape.

• Direct replacement radiator for Suzuki Vitara V6 2.0L automatic models from 1994-on
• Alloy core with plastic tanks for balanced strength and weight
• Core dimensions 425 mm height x 527 mm width x 27 mm thickness
• 34 mm inlet and outlet pipe diameters to match factory hoses
• Integrated transmission cooler to support automatic gearbox temperatures
• Suited to touring, towing and low range driving where extra cooling is required
• Wide core face area for improved airflow through the grille
• Designed to work with existing Vitara mounting points and shroud locations
• Helps restore cooling efficiency on ageing factory radiators
• Suitable for use in typical Australian ambient temperature ranges

Q: Does this radiator include an integrated transmission cooler for the automatic gearbox?

Yes, this radiator includes an integrated transmission cooler. The cooler sits within the main tank so the automatic fluid uses the same airflow and coolant path as the engine. This helps control transmission temperatures during towing or slow off-road work. You will need to reconnect the factory transmission cooler lines to the new unit.

Q: How can I confirm this Jayrad radiator will fit my Suzuki Vitara V6?

Match the core size and hose diameters to your existing radiator. This unit measures 425 mm high, 527 mm wide and 27 mm thick with 34 mm inlet and outlet pipes. It is specified for Suzuki Vitara V6 2.0L models from 1994-on with automatic transmission. Checking these measurements against your current setup reduces the chance of compatibility issues.

Q: Is this radiator suitable for long-distance touring in hot Australian conditions?

Yes, this radiator is suitable for touring use in hot conditions. The alloy core and 27 mm thickness provide solid heat transfer for the V6 engine on long highway runs. The wide 527 mm face area gives plenty of contact with incoming air. The integrated transmission cooler also helps manage gearbox heat when the vehicle is loaded.

Q: Do I need any special hoses or adapters to install this radiator?

No special hoses or adapters are typically required if your vehicle matches the listed application. The radiator uses 34 mm inlet and outlet diameters which align with standard Suzuki Vitara V6 automatic hoses. Reusing correctly sized clamps and hoses in good condition helps maintain a secure seal. If your existing hoses are worn or perished, replacing them at the same time is good practice.

Suitable for Suzuki Vitara V6 2.0L petrol models from 1994-on with automatic transmission. Suits vehicles that use an alloy core and plastic tank radiator with an integrated transmission cooler. Check core height 425 mm, width 527 mm and thickness 27 mm plus 34 mm inlet and outlet diameters against the existing radiator before install. Professional fitting is recommended to ensure correct hose alignment and transmission cooler line connection.