The Jayrad JR2060J radiator slots straight into Toyota Land Cruiser FZJ80 petrol autos and keeps the big wagon ready to tackle long climbs and heavy loads. The core stands at 350 mm high and 697 mm wide so it fills the factory opening and cops plenty of airflow. A 26 mm core thickness holds good coolant volume without crowding the fan so you can get out there with confidence in hot country. Jayrad keeps the hose connections simple with 31 mm inlet and 31 mm outlet necks that line up with standard FZJ80 hoses. The integrated transmission cooler suits automatic models so the gearbox stays in the safe zone while towing. The overall sizing matches original mounts which makes this a smart buy when you want fresh cooling gear without custom brackets. Straight facts solid specs and ready for real Aussie conditions.

• Suits Toyota Land Cruiser FZJ80 petrol automatic models
• Core height of 350 mm for factory-style coverage
• Core width of 697 mm matches radiator support
• 26 mm core thickness balances cooling and clearance
• 31 mm inlet neck suits standard upper hose
• 31 mm outlet neck suits standard lower hose
• Includes integrated transmission cooler for autos
• Direct-fit style for FZJ80 with A/C and power steering
• Compatible reference to Jayrad part JR2049J
• Supplied with plastic mounting clips as shown

Q: Does this radiator suit all Toyota Land Cruiser 80 Series models?

No, this radiator suits FZJ80 petrol models with automatic transmission. Other 80 Series variants may run different core sizes or hose locations that will not match this unit. Always check your build code and engine designation before ordering. Matching the transmission type is just as important as matching the body series.

Q: Is there an integrated transmission cooler in this radiator?

Yes, this radiator includes a transmission cooler suitable for automatic transmissions. The cooler runs inside the tank to manage gearbox fluid temperature using engine coolant as the heat sink. Correct line routing and new sealing washers are important during install. A transmission flush and fresh fluid are often carried out at the same time.

Q: What hose size does this radiator use at the inlet and outlet?

Both the inlet and outlet necks are 31 mm in diameter. This matches the standard hose size on FZJ80 petrol automatic models. Replacing old hoses with new 31 mm units at the same time can reduce clamp weep and failures. Always use quality clamps tightened to the correct torque.

Q: Can this radiator be used as a replacement for Jayrad JR2049J?

Yes, the listing notes it can use JR2049J as a reference part. This cross-reference helps when matching older workshop records or previous installs that used JR2049J. Dimensions and connections remain aligned with FZJ80 petrol automatic requirements. Always confirm part numbers against your vehicle identification plate.

Can use Jayrad radiator JR2049J as a compatible reference part.

• Suits Toyota Land Cruiser FZJ80 petrol models with automatic transmission
• Suitable for applications with air conditioning and power steering (A/P)
• Includes integrated transmission cooler for automatic transmission use
• Cross-reference: can use Jayrad radiator part JR2049J
• Professional installation recommended following Toyota Land Cruiser FZJ80 workshop procedures