The Jayrad JR2214J radiator keeps the 80 Series Land Cruiser coolant under control when you load the wagon with 400 kg of gear or hook up a 2500 kg van. A core that stands 398 mm high and 610 mm wide gives plenty of face area for slow climbs in low range. A 64 mm thick core helps move heat out when the tacho sits near 3000 rpm for long stretches.

The inlet and outlet necks both measure 38 mm which lines up with standard hoses and clamps. The built in transmission cooler suits auto boxes that run over 90 °C in sand or stop start traffic. The setup matches Toyota Land Cruiser 80 Series petrol and diesel automatic models from 1990 to 1998, so you get a smart buy that actually fits the bay and keeps temps in check.

• Suits Toyota Land Cruiser 80 Series
• Compatible with petrol and diesel engines
• For automatic transmission models 1990–1998
• Core height measures 398 mm
• Core width measures 610 mm
• Core thickness measures 64 mm
• Inlet neck diameter is 38 mm
• Outlet neck diameter is 38 mm
• Includes integrated transmission oil cooler
• Ideal replacement radiator for touring and towing

Q: Does this radiator fit both petrol and diesel 80 Series Land Cruisers?

Yes, it suits both petrol and diesel automatic 80 Series models from 1990 to 1998. That means the core size and hose diameters line up with factory layouts across those engines. Still, it is worth checking your build year and transmission type against JR2214J. If your wagon is manual this specific unit is not listed for it.

Q: What are the core dimensions of the JR2214J radiator?

The core measures 398 mm high by 610 mm wide by 64 mm thick. These measurements refer to the finned core only, not the tanks or side plates. Matching these numbers against your existing radiator helps confirm fitment. Measuring the old unit with a tape before ordering is a smart move.

Q: What hose size does this radiator use?

Both the inlet and outlet necks use a 38 mm diameter. This matches the common hose size used on Toyota Land Cruiser 80 Series automatic models in the 1990–1998 range. Reusing existing hoses is often possible if they are still in good condition. Many owners use this chance to replace old hoses and clamps.

Q: Does the JR2214J include a transmission cooler?

Yes, it includes an integrated transmission cooler section inside the radiator tank. This cooler handles the automatic transmission fluid that would normally run through the factory radiator. Keeping this circuit in good condition helps control gearbox temperatures when towing or driving in soft sand. Fresh fluid and clean cooler circuits go hand in hand.

Suitable for Toyota Land Cruiser 80 Series petrol and diesel automatic transmission models built between 1990 and 1998. Confirm JR2214J against your existing radiator dimensions of 398 mm high by 610 mm wide by 64 mm thick and 38 mm inlet and outlet diameters before installation. Professional installation is recommended for correct hose routing and transmission cooler line connection.