This Jayrad JR2020J radiator drops straight into Hilux LN106, LN107, LN111 and 4Runner LN130 manual setups with a core size around 475 x 530 x 48 mm. The 3 row core gives more tube and fin area than a thinner unit, handy when you are hauling gear or a camper in 40°C heat. With 35 mm inlet and outlet necks it lines up with standard hoses so you keep the factory routing and clamps.

The build runs a 48 mm thick core, so it can shift plenty of heat even at low fan speeds on slow tracks. A core height of 475 mm and width of 530 mm sit well behind most bullbars without choking airflow. The manual layout and integrated cooler section suit old-school mechanical drivetrains that still cop towing duties. It is a smart buy if your original radiator fins are crumbling after decades of work.

• Suits Toyota Hilux LN106 LN107 LN111 (1988–1997)
• Also suits Toyota 4Runner LN130 manual
• Core height approximately 475 mm
• Core width approximately 530 mm
• Core thickness 48 mm three row design
• Inlet and outlet necks both 35 mm
• Direct replacement manual transmission radiator
• Integrated cooler section within the radiator assembly
• Ideal for 4x4 and touring performance setups
• Jayrad branded cooling component for Toyota platforms

Q: Does this Jayrad radiator suit automatic Hilux or 4Runner models?

No, this specific JR2020J radiator is listed for manual transmission vehicles. The core and tank layout are matched to manual cooling requirements and hose routing. Automatic models usually need different transmission cooler provisions. Check the part number against your VIN or speak with our crew for the correct auto variant.

Q: What years of Toyota Hilux will this radiator fit?

This radiator suits LN106, LN107 and LN111 Hilux models built from 1988 to 1997. Those chassis codes cover the solid axle and early independent front suspension utes in that period. Matching the LN code is more accurate than just using the build year. Always confirm your vehicle plate or handbook before ordering.

Q: Is this radiator suitable for towing and loaded touring use?

Yes, the 48 mm three row core is well suited to engines that spend time under load. Extra tube and fin area helps manage coolant temperature when towing or climbing in low range. Keeping the cooling system clean and using the correct cap pressure are still important. Pair it with good quality coolant and regular system checks.

Q: Do I need to modify my factory hoses or mounts to install it?

The inlet and outlet diameters are 35 mm which matches the original hose sizing on the listed models. Factory-style mounts and shrouds are intended to be reused during installation. Any worn hoses or clamps should be replaced at the same time. A qualified mechanic can confirm alignment and bleed the system correctly.

• Vehicle compatibility: Toyota Hilux LN106 LN107 LN111 built 1988–1997 with manual transmission
• Additional compatibility: Toyota 4Runner LN130 with manual transmission
• Intended position: Direct replacement engine radiator
• Driveline category: 4x4 and touring performance parts
• Professional installation recommended to match factory mounts and hose diameters