This Jayrad radiator drops into Nissan Pulsar N14 and N15 1.6L bays and keeps coolant under control across city runs and freeway stints. With a core height of 322 mm and width of 648 mm you get stock-style airflow without cutting or shifting other gear. A 26 mm core thickness keeps coolant volume close to factory spec so the setup can handle long climbs without coolant boiling over. The inlet and outlet necks both sit at 28 mm so the original hoses slide straight back on and clamp up without drama. The tanks carry ports for an auto transmission cooler so one unit covers both A/P and M/T layouts from 1991 through to 2000. The Jayrad RA062 part number makes cross-referencing simple when you are lining it up against old gear on the bench.

• Suits Nissan Pulsar N14 1.6L 1991–1995
• Suits Nissan Pulsar N15 1.6L 1995–2000
• Compatible with manual transmission vehicles (M/T)
• Includes fittings for automatic transmission cooler (A/P)
• Core height measures 322 mm
• Core width measures 648 mm
• Core thickness is 26 mm
• Inlet diameter is 28 mm
• Outlet diameter is 28 mm
• Genuine Jayrad RA062 replacement radiator

Q: Will this radiator fit my Nissan Pulsar N14 1.6L with manual transmission?

Yes, this radiator suits Nissan Pulsar N14 1.6L models with manual transmission. The listed fitment covers N14 models built between 1991 and 1995 with the 1.6L engine. Core dimensions of 322 mm x 648 mm x 26 mm match the standard bay on these cars. Always compare your original radiator measurements before ordering to confirm.

Q: Does this radiator have fittings for an automatic transmission cooler?

Yes, this unit includes provisions for an automatic transmission cooler. The A/P notation indicates the radiator can support automatic transmission cooling lines. This means it can be used on automatic cars that require fluid to pass through the radiator tank. It also works on manual cars where those ports simply remain unused.

Q: Do I need to modify my hoses to install this radiator?

In most cases you can reuse standard hoses because the inlet and outlet necks are 28 mm. Matching neck diameters mean factory-style hoses normally slide straight onto the new radiator. Inspect your existing hoses for wear or cracking while the system is drained. Many owners choose to replace aged hoses at the same time for peace of mind.

Q: What should I check before ordering this radiator?

You should confirm vehicle model, engine size and core measurements. Make sure your car is a Nissan Pulsar N14 or N15 with a 1.6L engine built between 1991 and 2000. Measure your current radiator core height, width and thickness to compare with 322 mm x 648 mm x 26 mm. Checking these details upfront helps avoid fitment issues during installation.

• Suits Nissan Pulsar N14 1.6L models built 1991–1995
• Suits Nissan Pulsar N15 1.6L models built 1995–2000
• Suits vehicles fitted with manual transmission (M/T)
• Radiator includes provisions for automatic transmission cooler (A/P)
• Always confirm core dimensions of 322 mm x 648 mm x 26 mm against existing radiator before purchase
• Professional installation recommended to maintain correct coolant level and hose alignment