Jayrad’s JR6154J radiator steps straight into the Nissan Patrol Y62 V8 5.6L auto with a core height of 665 mm ready for long hauls and slow crawls. A 728 mm wide core and 44 mm thickness move plenty of heat away from the engine when you tow or tackle dunes. An integrated transmission cooler keeps the auto in its comfort zone so you can get out there without watching the temp gauge every minute.
The tanks and core are built to suit factory mounts on Patrol Y62 models from 2013-on so the gear sits where Nissan intended. A 35 mm inlet and 35 mm outlet line up with standard hoses which keeps the setup simple at service time. The radiator spec suits Australian conditions where high ambient temps and long grades punish cooling systems. For a Y62 owner this is a smart buy that focuses on real-world cooling performance.
- Suits Nissan Patrol Y62 V8 5.6L auto (2013-on)
- Jayrad JR6154J direct replacement radiator
- Core height of 665 mm for strong cooling area
- 728 mm core width to maximise heat transfer
- 44 mm core thickness balances cooling and airflow
- 35 mm inlet and 35 mm outlet connections
- Integrated transmission cooler for automatic gearbox
- Designed to work with factory mounts and shrouds
- Suitable for towing and touring duty cycles
- Supplied as a complete radiator assembly only
Q: Does this radiator suit manual transmission Nissan Patrol Y62 models?
No, this radiator is specified for automatic transmission models only. The integrated transmission cooler is designed around the auto gearbox lines and pressures. Manual models use a different cooling layout without those fittings. Always match the transmission type on your Patrol before ordering cooling gear.
Q: Do I need to modify hoses to fit this Jayrad radiator?
No, the radiator uses a 35 mm inlet and 35 mm outlet to suit standard Patrol Y62 hose sizes. In good condition the existing hoses will align with the new necks. Many owners still choose to replace old hoses during the job. Fresh clamps and coolant are also worth doing while the system is open.
Q: Is this radiator suitable for towing caravans or heavy trailers?
Yes, the 665 mm high and 728 mm wide core is sized for the V8 5.6L working under load. The 44 mm thickness provides solid heat rejection when pulling weight on hot days. The built-in transmission cooler also helps manage auto temperatures while towing. Always keep the rest of the cooling system maintained for best results.
Q: Do I need any extra brackets or hardware to install this unit?
In most cases you can reuse the existing Patrol Y62 mounting hardware. The Jayrad JR6154J is built as a direct replacement assembly to sit in the factory support panel. Check your current rubbers and mounts and replace any worn pieces during install. Proper mounting stops vibration and extends radiator life.
Fits Nissan Patrol Y62 V8 5.6L automatic models from 2013-on. Suit vehicle models factory equipped with an automatic transmission. Professional installation and coolant refill are required. Confirm JR6154J against the OE part and VIN before ordering.
- Direct replacement Y62 Patrol radiator
- Integrated cooler for automatic transmissions
- 665 mm by 728 mm core size
- 44 mm thickness for stable cooling
- Built tough for Aussie heat
- Solid gear for towing trips
- Core height: 665 mm
- Core width: 728 mm
- Core thickness: 44 mm
- Inlet diameter: 35 mm
- Outlet diameter: 35 mm
- Transmission cooler: Yes
- Suit: Nissan Patrol Y62 V8 5.6L auto (2013-on)
Jayrad radiator JR6154J unit only
| SKU | JR6154J |
|---|---|
| Barcode # | 9316042591132 |
| Brand | Jayrad |
| Shipping Weight | 10.0000kg |
| Shipping Width | 0.728m |
| Shipping Height | 0.665m |
| Shipping Length | 0.044m |
Jayrad’s JR6154J radiator steps straight into the Nissan Patrol Y62 V8 5.6L auto with a core height of 665 mm ready for long hauls and slow crawls. A 728 mm wide core and 44 mm thickness move plenty of heat away from the engine when you tow or tackle dunes. An integrated transmission cooler keeps the auto in its comfort zone so you can get out there without watching the temp gauge every minute.
The tanks and core are built to suit factory mounts on Patrol Y62 models from 2013-on so the gear sits where Nissan intended. A 35 mm inlet and 35 mm outlet line up with standard hoses which keeps the setup simple at service time. The radiator spec suits Australian conditions where high ambient temps and long grades punish cooling systems. For a Y62 owner this is a smart buy that focuses on real-world cooling performance.
- Suits Nissan Patrol Y62 V8 5.6L auto (2013-on)
- Jayrad JR6154J direct replacement radiator
- Core height of 665 mm for strong cooling area
- 728 mm core width to maximise heat transfer
- 44 mm core thickness balances cooling and airflow
- 35 mm inlet and 35 mm outlet connections
- Integrated transmission cooler for automatic gearbox
- Designed to work with factory mounts and shrouds
- Suitable for towing and touring duty cycles
- Supplied as a complete radiator assembly only
Q: Does this radiator suit manual transmission Nissan Patrol Y62 models?
No, this radiator is specified for automatic transmission models only. The integrated transmission cooler is designed around the auto gearbox lines and pressures. Manual models use a different cooling layout without those fittings. Always match the transmission type on your Patrol before ordering cooling gear.
Q: Do I need to modify hoses to fit this Jayrad radiator?
No, the radiator uses a 35 mm inlet and 35 mm outlet to suit standard Patrol Y62 hose sizes. In good condition the existing hoses will align with the new necks. Many owners still choose to replace old hoses during the job. Fresh clamps and coolant are also worth doing while the system is open.
Q: Is this radiator suitable for towing caravans or heavy trailers?
Yes, the 665 mm high and 728 mm wide core is sized for the V8 5.6L working under load. The 44 mm thickness provides solid heat rejection when pulling weight on hot days. The built-in transmission cooler also helps manage auto temperatures while towing. Always keep the rest of the cooling system maintained for best results.
Q: Do I need any extra brackets or hardware to install this unit?
In most cases you can reuse the existing Patrol Y62 mounting hardware. The Jayrad JR6154J is built as a direct replacement assembly to sit in the factory support panel. Check your current rubbers and mounts and replace any worn pieces during install. Proper mounting stops vibration and extends radiator life.
Fits Nissan Patrol Y62 V8 5.6L automatic models from 2013-on. Suit vehicle models factory equipped with an automatic transmission. Professional installation and coolant refill are required. Confirm JR6154J against the OE part and VIN before ordering.
- Direct replacement Y62 Patrol radiator
- Integrated cooler for automatic transmissions
- 665 mm by 728 mm core size
- 44 mm thickness for stable cooling
- Built tough for Aussie heat
- Solid gear for towing trips
- Core height: 665 mm
- Core width: 728 mm
- Core thickness: 44 mm
- Inlet diameter: 35 mm
- Outlet diameter: 35 mm
- Transmission cooler: Yes
- Suit: Nissan Patrol Y62 V8 5.6L auto (2013-on)
Jayrad radiator JR6154J unit only
| SKU | JR6154J |
|---|---|
| Barcode # | 9316042591132 |
| Brand | Jayrad |
| Shipping Weight | 10.0000kg |
| Shipping Width | 0.728m |
| Shipping Height | 0.665m |
| Shipping Length | 0.044m |

More info