The Jayrad JR8071J radiator is built for Triton MK 3.0 L petrol autos from 1996 to 2006, so you know it lines up with the factory mounts and hoses. A core size of 375 x 600 x 36 mm gives enough surface area to handle slow climbs, beach work and suburban traffic without the temp gauge creeping up. The built-in transmission cooler keeps the auto fluid in check when you are hauling gear or running a loaded tray.

The core runs the full 600 mm width and 375 mm height, giving plenty of fin area for airflow from your engine fan and forward speed. That 36 mm thickness strikes a balance between coolant volume and flow, which works well for steady touring across Aussie highways and backroads. Match it to a Triton MK 3.0 L petrol automatic and you get cooling gear that suits the chassis without extra fabrication.

• Suits Mitsubishi Triton MK 3.0L petrol automatic models
• Fitment range covers 1996 through 2006 vehicles
• Core height of 375 mm for factory-style coverage
• Core width of 600 mm to match original radiator footprint
• Core thickness of 36 mm for solid coolant volume
• Integrated transmission cooler for automatic gearbox lines
• Direct-style replacement radiator for OEM unit
• Suitable for 4x4 touring and work use
• Category: performance radiator for 4x4 and touring
• Jayrad brand replacement cooling gear

Q: Does this radiator fit manual Mitsubishi Triton MK models?

No, this radiator is listed for automatic 3.0L petrol Mitsubishi Triton MK models only. The auto transmission cooler inside the tank is matched to automatic gearbox lines. Manual Triton models usually use a different radiator pattern. Always cross-check your VIN and transmission type before ordering to avoid mismatch.

Q: Is the transmission cooler built into this radiator?

Yes, this radiator includes an integrated transmission cooler. The cooler sits inside the main tank and uses the same airflow as the engine cooling core. Your auto transmission fluid lines connect to the fittings supplied with the radiator. This keeps the install layout similar to the original factory setup.

Q: What are the core dimensions of this radiator?

The core measures 375 mm high, 600 mm wide and 36 mm thick. These measurements refer to the finned cooling area, not the overall tank-to-tank size. Matching these dimensions with your existing unit helps confirm compatibility. The sizing is tailored to cooling needs of the Triton MK 3.0L petrol automatic.

Q: Can I install this radiator at home?

It can be installed at home by someone with solid mechanical skills and the right tools. The job involves draining coolant, disconnecting hoses and transmission lines, and bleeding the system afterwards. Incorrect bleeding or loose transmission fittings can cause issues. Many owners choose a workshop to handle the swap for peace of mind.

• Suits Mitsubishi Triton MK 3.0L petrol automatic models from 1996 to 2006
• Direct replacement-style radiator for factory unit
• Integrated transmission cooler for automatic gearbox lines
• Professional installation recommended to ensure correct coolant level and hose routing