This Jayrad JR8072J radiator is made for Mitsubishi Triton MK 3.0L utes built from 1999 to 2006 and runs a core size of 375x600x36 mm to line up with the factory mounts. The 375 mm height and 600 mm width match the original shroud sweep so the fan can pull air properly when you crawl up climbs or haul gear. The 36 mm thickness gives enough coolant volume to tackle long days in low range without the temp needle wandering.

The A/P style build means alloy core and plastic tanks, a combo plenty of Tritons run without drama when the coolant stays fresh. The core dimensions stay tight at 375x600x36 mm so your hoses, brackets and fan shroud line up like the old unit. This manual trans setup is a smart buy if you want straightforward replacement gear that just does the job in Aussie heat and corrugations.

• Suits Mitsubishi Triton MK 3.0L 1999–2006
• Jayrad JR8072J direct replacement radiator
• Manual transmission application as specified
• Core height 375 mm for correct fit
• Core width 600 mm for full frontal coverage
• Core thickness 36 mm for stable cooling capacity
• A/P alloy core with plastic tank layout
• Core dimensions match many factory shrouds and mounts
• Suitable for general touring and daily driving use
• Ideal when refreshing ageing factory cooling hardware

Q: Does this radiator fit all Mitsubishi Triton MK engines?

No, it is specified for 3.0L Triton MK models. The listing notes compatibility with 3.0L engines from 1999 to 2006 with manual transmission. Other engine sizes or auto transmissions may use different hose layouts or core sizes. Always cross-check the JR8072J part number against your VIN and original radiator dimensions before ordering.

Q: Is this radiator supplied with a cap, hoses, or clamps?

No, only the radiator assembly is listed. Reusing old hoses or caps can lead to leaks once new pressure is applied. Most workshops recommend replacing the radiator cap and any soft or cracked hoses during installation. Purchasing fresh clamps at the same time can help lock in a reliable cooling setup.

Q: Can this radiator be used with automatic transmission Triton models?

It is listed for manual transmission applications only. Automatic models often require an internal or external transmission cooler path that may not be present or correct on a manual-spec radiator. Using the wrong configuration can risk poor transmission cooling. Always match the transmission type listed on the radiator to your vehicle.

Q: Do I need to use a specific coolant type with this radiator?

Use the coolant type recommended in your Mitsubishi Triton owner manual. Sticking with the specified coolant concentration helps protect the alloy core and plastic tanks from corrosion and scaling. Mixing random coolant types can shorten radiator life. If in doubt, flush the old coolant and refill with a fresh batch that meets Mitsubishi specifications.

Suitable for Mitsubishi Triton MK 3.0L petrol models built between 1999 and 2006 with manual transmission. Radiator is built to match the specified core size of 375 mm x 600 mm x 36 mm and A/P style configuration. Professional installation is recommended to ensure correct coolant level bleeding and hose routing. Always confirm core dimensions and mounting layout against the original radiator before fitment.