This Jayrad JR8047J radiator suits Mitsubishi Pajero QAIO from 1999 to 2002 with manual transmission and an A/P style cooler, using a core height of 423 mm that lines up with the factory shroud. The 660 mm wide core keeps coolant temps steady when you load the wagon for a weekend. The 16 mm thick core gives enough flow without crowding the fan, so you can tow or tackle sand without constant temp checks. The 35 mm inlet and 35 mm outlet match standard Pajero hoses, so the existing clamps and pipework stay in the kit. The transmission cooler section runs inside the same 423 mm by 660 mm footprint, which helps control gearbox temps when you crawl or tow. The layout is a smart buy for drivers who want straightforward replacement gear that copes with Aussie heat, from bitumen climbs to slow bush tracks.

• Jayrad radiator model JR8047J
• Suits Mitsubishi Pajero QAIO 1999–2002
• Compatible with manual transmission setups
• Core height measures 423 mm
• Core width measures 660 mm
• Core thickness measures 16 mm
• Inlet hose diameter is 35 mm
• Outlet hose diameter is 35 mm
• Integrated transmission cooler included
• Direct replacement style cooling gear

Q: Does this radiator fit all Mitsubishi Pajero models from 1999 to 2002?

No, it suits Pajero QAIO models with manual transmission. Always match the core size of 423 mm by 660 mm and 16 mm thickness to your existing radiator before buying. Check that your vehicle uses 35 mm inlet and outlet hoses. If your build code or transmission type is different, this gear may not be correct.

Q: What hose size does this Jayrad JR8047J radiator use?

It uses 35 mm inlet and 35 mm outlet hose connections. That means it matches common Mitsubishi Pajero QAIO coolant hose sizes from 1999 to 2002. You should still compare the old radiator necks with a tape measure. Correct hose diameter helps prevent leaks and keeps clamp tension even.

Q: Is there a built-in transmission cooler on this radiator?

Yes, this radiator includes an integrated transmission cooler section. The cooler sits inside the main core area and connects to the vehicle’s transmission lines. This setup helps control transmission fluid temperature during towing or low-speed work. It also keeps the engine bay layout similar to the original equipment.

Q: What measurements should I check before ordering this radiator?

Check core height, core width, core thickness, and hose neck size. This radiator has a 423 mm high core, 660 mm wide core, and 16 mm thickness with 35 mm inlet and outlet diameters. Matching these figures against your existing radiator reduces the chance of fitment issues. Taking a few minutes with a tape measure can save time during installation.

Suitable for Mitsubishi Pajero QAIO models built between 1999 and 2002 with manual transmission. Radiator includes an integrated transmission cooler for appropriate applications. Check core height of 423 mm, width of 660 mm and thickness of 16 mm against the original unit before installation. Confirm inlet and outlet hose diameter of 35 mm matches existing cooling hoses on the vehicle.