The Jayrad JR8011J radiator slots into Mitsubishi L300 vans running 2.0L or 2.4L petrol and 2.5L diesel engines from 1986 to 2000, with a core that stands 400 mm high. You get 585 mm of core width and 44 mm thickness, so it can tackle slow climbs and stop‑start traffic without temps creeping up. The 35 mm inlet and outlet suit standard hoses, so you can get out there again without custom plumbing. This gear is built tough for L300 workhorses that spend hours in Aussie heat, with a finned core stretching 400 mm by 585 mm to shed heat fast. The 44 mm thick core holds more coolant, which is a smart buy for vans carrying tools or camping setups. Manual‑transmission compatibility and matching 35 mm hose connections keep the install straightforward, giving you solid cooling backup for long highway runs and loaded city routes.

• Suits Mitsubishi L300 2.0L, 2.4L petrol and 2.5L diesel engines
• Fits L300 model years 1986 through 2000
• Manual transmission (M/T) compatible configuration
• Core height of 400 mm for good coverage
• Core width of 585 mm for strong airflow area
• Core thickness of 44 mm increases coolant capacity
• 35 mm inlet diameter matches standard radiator hose
• 35 mm outlet diameter keeps return flow consistent
• Includes provision for a transmission cooler
• Jayrad part number JR8011J for straightforward identification

Q: Does this radiator suit both petrol and diesel Mitsubishi L300 models?

Yes, it suits 2.0L and 2.4L petrol plus 2.5L diesel L300 models with manual transmission from 1986 to 2000. That means one part number can cover mixed engine fleets. It helps when you are keeping older vans on the road without juggling multiple radiators. Always double‑check engine size and transmission type against your compliance plate before ordering.

Q: What hose size does this radiator use on the inlet and outlet?

Both the inlet and outlet use 35 mm hose connections. This matches common L300 radiator hoses so you can usually retain standard sizing if the hoses are still in good condition. Many owners choose to replace old hoses at the same time for peace of mind. Fresh clamps and coolant are also worth fitting when the system is drained.

Q: How big is the cooling core on this Jayrad radiator?

The core is 400 mm high, 585 mm wide and 44 mm thick. That footprint gives a good balance between airflow and coolant volume for an older work van. The extra 44 mm thickness helps buffer temperature spikes when the engine is working hard. It is especially useful when the L300 is loaded or spending time at low road speed.

Q: Is there a transmission cooler provision on this radiator?

Yes, this radiator includes transmission cooler support even though it is listed for manual transmission models. That design keeps options open for different driveline setups using the same style of tank. It can simplify sourcing when you run a small fleet. Your mechanic can confirm how the cooler ports are used or capped in your specific configuration.

Suitable for Mitsubishi L300 models with 2.0L petrol, 2.4L petrol and 2.5L diesel engines built between 1986 and 2000 using manual transmission. Check the existing radiator core height of 400 mm, width of 585 mm and thickness of 44 mm along with 35 mm inlet and outlet hose sizes before install. Professional installation is recommended and all hoses, clamps and coolant should be inspected or replaced as required.