The Jayrad JR8094J radiator slots into Mitsubishi 380 autos from 10/2005 on and takes over cooling duty with a core that measures 400 mm high and 755 mm wide. The 16 mm core thickness keeps coolant volume and airflow in balance for long highway runs or city idling. The built-in 375 mm transmission cooler handles the auto fluid so you can tackle heat and traffic without nursing the temp gauge. The inlet and outlet both sit at 35 mm diameter so factory hoses and clamps stay in play which is a smart buy when you want fewer surprises in the shed. The core size matches the original mounting points so the gear lines up with the fan and shroud. Part numbers MN180514 and MIT42038 give you a clear cross reference when double checking fitment. This is straightforward cooling gear for real Aussie conditions.

• Suits Mitsubishi 380 automatic models from 10/2005-on
• Direct replacement for OEM references MN180514 and MIT42038
• Core height 400 mm for factory-style cooling coverage
• Core width 755 mm to match original mounting footprint
• Core thickness 16 mm to suit existing fan shroud clearance
• 35 mm inlet neck sized for factory upper hose
• 35 mm outlet neck sized for factory lower hose
• Integrated 375 mm transmission cooler for auto fluid temperature control
• Auto A/P configuration suitable for automatic transmission setups
• Ideal replacement radiator for ageing or leaking factory units

Q: Does this radiator suit all Mitsubishi 380 models?

This radiator suits Mitsubishi 380 automatic models built from October 2005 onward. Manual models can run different radiator and cooler setups. Always confirm build date from the compliance plate before ordering. Measure your existing core and check the 400 mm x 755 mm x 16 mm dimensions match your current unit.

Q: Is there an integrated transmission cooler in this radiator?

Yes, this radiator includes an integrated transmission cooler with a listed length of 375 mm. That cooler uses the lower tank area to transfer heat from the auto fluid to the coolant. You will need to reconnect the existing transmission cooler lines during installation. Always ensure lines are clean and correctly tightened after the swap.

Q: What hose size does this radiator use?

Both the inlet and outlet hose necks are specified at 35 mm diameter. That size matches the original Mitsubishi 380 automatic radiator connections. Check your upper and lower hoses for wear while the system is drained. Replacing cracked hoses at the same time can help avoid future leaks.

Q: How can I confirm this is the right replacement part number?

This radiator cross references to MN180514 and MIT42038 for Mitsubishi listings. Match these numbers against your factory parts information where possible. You can also compare the listed core height width and thickness to your existing radiator. When in doubt our crew can help you double check compatibility before you buy.

Suitable for Mitsubishi 380 automatic transmission models built from October 2005 onwards. Cross references include MN180514 and MIT42038. Check core size of 400 mm x 755 mm x 16 mm against the original unit before install. Confirm 35 mm inlet and outlet hose sizes match existing cooling system.