This Jayrad radiator suits Holden Rodeo TF utes from 1988 to 1997 with 2.8L diesel and manual box, running a 420 mm tall core for steady cooling when you load the tray. The 530 mm core width gives enough face area for slow climbs and stop start traffic. Matching 34 mm inlet and outlet necks line up with factory hoses so you can keep the kit simple. The core sits at 32 mm thick, so airflow through the fins stays consistent when you are on dusty back roads. The tanks and side brackets line up with Rodeo TF mounting points, which keeps the setup tidy under the bonnet. An internal layout tailored to manual models avoids extra auto cooler plumbing. This is smart buy gear if you want proven cooling dimensions without reworking your existing hoses or fan shroud.

• Suits Holden Rodeo TF 1988–1997
• Compatible with 2.8L diesel engines
• For manual transmission models only
• Core height measures 420 mm
• Core width measures 530 mm
• Core thickness measures 32 mm
• Inlet diameter is 34 mm
• Outlet diameter is 34 mm
• Includes provision for transmission cooler
• Direct replacement style radiator for OEM unit

Q: Does this radiator fit all Holden Rodeo TF models?

No, it fits Holden Rodeo TF models with 2.8L diesel engines and manual transmissions built between 1988 and 1997. Always match the core size of 420 mm height and 530 mm width against your existing unit. Check that your engine is the 2.8L diesel variant, not petrol. If your ute is automatic, this specific radiator is not the right choice.

Q: Do I need new hoses to install this Jayrad radiator?

Not usually, as the inlet and outlet diameters are both 34 mm, which matches the original Rodeo TF diesel manual hoses. It is still wise to inspect your existing hoses for cracks or softness. Replacing old hoses at the same time can prevent future leaks. Many mechanics recommend new clamps as well when refitting cooling gear.

Q: Is this radiator suitable for towing with a loaded tray or camper?

Yes, the 420 mm by 530 mm core and 32 mm thickness give enough cooling area for typical towing within the vehicle’s rated limits. Keeping the cooling system clean and the fins free of mud or bugs is important under towing loads. Always watch coolant levels before long trips. A well maintained system will handle extended climbs more effectively.

Q: Can I install this radiator at home in my shed?

You can if you are confident with basic spanners and coolant handling, but many owners prefer a mechanic. Correct bleeding of air from the 2.8L diesel system is critical to avoid hot spots. A workshop will also pressure test the system after installation. That extra check helps pick up any minor leaks at hose joints or drain plugs.

Suitable for Holden Rodeo TF models built between 1988 and 1997 with 2.8L diesel engine and manual transmission. Designed as a direct replacement radiator for factory mounting points in these vehicles. Always confirm core size of 420 mm height and 530 mm width with 34 mm inlet and outlet before installation. Professional installation by a qualified mechanic is recommended for correct coolant bleeding and hose alignment.