This Jayrad JR3059J radiator slots into Ford Econovan JG and JH manual vans with the 2.0L petrol motor from 2000 to 2006 without needing custom brackets. The core stands at 350 mm high and 538 mm wide so it lines up with the factory shroud and mounts. The 26 mm thick core handles steady coolant flow when you are stuck in 40 degree city traffic or grinding up long highway climbs. This kit runs 35 mm inlet and outlet necks so your original hoses clamp straight on and you spend less time hunting fittings. The radiator also includes an M16 x 1.5 low level sender port so you can keep an eye on coolant level before things get hot. The integrated transmission cooler passage is matched to manual models so heat stays in check when the van is fully loaded and working hard day after day.

• Suits Ford Econovan JG/JH 2.0L petrol manual (2000–2006)
• Direct replacement Jayrad JR3059J radiator
• Core height measures 350 mm
• Core width measures 538 mm
• Core thickness measures 26 mm
• Inlet hose neck diameter 35 mm
• Outlet hose neck diameter 35 mm
• Includes M16 x 1.5 low level sender port
• Integrated transmission cooler provision for manual models
• Purpose built dimensions to match factory mounting points

Q: Does this radiator suit automatic Ford Econovan models?

No, this radiator is listed for manual Ford Econovan JG and JH 2.0L petrol models only. The hose routing and cooler layout on automatic versions can differ. Using the wrong style can affect cooling performance. Always match transmission type and engine details against your original unit before ordering.

Q: What measurements should I check against my existing radiator?

Check core height, width, thickness, and hose diameters. This radiator core is 350 mm high, 538 mm wide, and 26 mm thick, with 35 mm inlet and outlet necks. Matching these figures with your current unit reduces fitment issues. Measure only the finned core area, not the side tanks or brackets.

Q: Can I re-use my original radiator cap and hoses?

Yes, the 35 mm inlet and outlet sizes are intended to work with standard Econovan hoses and clamps. If your old hoses are soft, cracked, or swollen, replacing them at the same time is a smart call. A fresh cap and hoses help the new core do its job properly. This keeps cooling performance consistent.

Q: Is a low level sender included with the radiator?

No, the listing specifies an M16 x 1.5 low level sender port only. You can screw an appropriate sender unit into this threaded hole if your van already runs a warning light or gauge. Keeping the port ready makes upgrades simpler later. Always seal the sender to prevent coolant leaks.

• Suits Ford Econovan JG and JH series
• Model years: 2000 to 2006
• Engine: 2.0L petrol
• Transmission: Manual only
• Includes M16 x 1.5 low level sender port
• Direct replacement radiator for factory unit
• Ensure core size 350 x 538 x 26 mm matches original
• Professional installation recommended