The Jayrad JR3055J radiator is built for Ford Econovan JG and JH vans with 2.0L engines from 1997 to 2002 and Ford E2000 2.0L models from 10/1999 to 06/2006, all running manual gearboxes. With a core that measures 350 mm high and 545 mm wide, it slots into the standard support panel and lines up with the factory shroud, so you can tackle hot days and loaded runs without chasing odd sizes.

The 26 mm core thickness and 35 mm inlet and outlet diameters match the Mazda M43CMA cooling layout, giving steady flow through the tubes when you are hauling gear around town or out to site. The manual‑only configuration keeps it simple, with no auto cooler fittings to blank off or worry about. It is straight‑up replacement gear that matches factory dimensions and suits Aussie working vans that need to get out there day after day.

• Jayrad JR3055J replacement radiator
• Suits Ford Econovan JG/JH 2.0L M/T 1997–2002
• Also suits Ford E2000 2.0L M/T 10/1999–06/2006
• Compatible with Mazda M43CMA petrol engines
• Core height 350 mm for factory clearance
• Core width 545 mm to match original mounts
• Core thickness 26 mm for consistent cooling
• 35 mm inlet and 35 mm outlet neck sizes
• Manual‑transmission configuration without auto cooler lines
• Intended as a direct swap for the original radiator

Q: Does this radiator suit automatic Ford Econovan models?

No, this JR3055J radiator is listed for manual transmission models only. The tank layout and cooler provision differ between manual and automatic versions. Using a manual‑spec radiator on an automatic can leave the transmission without proper cooling. Always match the part number to your transmission type before ordering.

Q: How can I confirm this radiator will fit my van?

You can confirm fitment by checking your vehicle model, year range, engine, and core dimensions. This radiator suits Ford Econovan JG/JH and Ford E2000 with 2.0L Mazda M43CMA engines and a 350 x 545 x 26 mm core. Measuring your existing radiator and hose diameters helps avoid mix‑ups. If your dimensions differ, you likely need a different part number.

Q: What hose size does this radiator use?

This radiator uses 35 mm inlet and 35 mm outlet hose necks. Matching these diameters to your upper and lower hoses helps ensure a snug clamp seal. If your current hoses are worn or hardened, replacing them at the same time can prevent leaks. Sticking with the correct 35 mm size avoids strain on plastic necks.

Q: Is a transmission cooler included with this radiator?

No specific transmission cooler details are listed for this manual‑spec radiator. Manual vans normally rely on engine coolant alone, so there is no integrated auto trans cooler circuit to connect. This keeps installation straightforward on manual models. Automatic vehicles will usually require a different radiator with dedicated cooler fittings.

Suitable for Ford Econovan JG and JH models with 2.0L engines and manual transmissions from 1997 to 2002. Also suits Ford E2000 2.0L manual models built between October 1999 and June 2006 running the Mazda M43CMA engine. Intended as a direct replacement radiator that matches the listed core dimensions and hose diameters. Fitment should be checked against the original radiator dimensions and hose sizes before installation.