This GME Dual Desktop Charging Cradle holds two handhelds at once so you can park your TX685, TX6150, TX6155 or TX6160 in one spot after a day on the tracks instead of chasing loose leads around the cab. The cradle runs off a 12 V DC PS002 adaptor drawing about 1 A, so it suits a simple bench or workshop setup where the radios always go back to the same dock. The shell is solid plastic with enough thickness for regular use on a ute tray toolbox or workshop bench, and the charge contacts sit recessed in each bay to line up with the GME battery terminals. Vent slots along each side give the charger room to breathe when ambient temps are over 30 °C, which is common outback or in a closed shed. If you run a pair of handhelds as part of your touring kit, this cradle is a smart buy that keeps the gear sorted.

• Dual desktop charging cradle for GME handheld UHF radios
• Compatible with TX685, TX6150, TX6155 and TX6160 models
• Two charging bays allow simultaneous charging of two radios
• Desktop design suits workshop, office or home base setups
• Uses GME PS002 AC adaptor rated at 12 V DC, 1 A
• Clearly labelled rear plate with model and power ratings
• Side ventilation slots help manage charger heat build-up
• Durable black plastic housing for everyday 4WD and touring use
• Simple drop-in operation using recessed metal contacts
• Genuine GME radio accessory for matching GME handheld gear

Q: Does this cradle charge two GME handhelds at the same time?

Yes, the cradle has two charging bays. You can dock a pair of compatible GME handheld UHF radios in the two slots at once. The charger is built to work with the matching PS002 adaptor rated at 12 V and 1 A. That setup keeps a two-radio convoy kit topped up between trips.

Q: Which specific GME handheld models fit this charger?

This cradle suits TX685, TX6150, TX6155 and TX6160 handheld radios. The bays are shaped to match the case and battery footprint of those models. Using radios outside that group can lead to poor contact alignment. Sticking with the listed models gives a solid physical and electrical fit.

Q: What power adaptor should I use with the dual cradle?

Use the GME PS002 AC adaptor. The label on the cradle specifies a 12 V DC supply at 1 A from that adaptor. Running the correct adaptor helps avoid overload or under-voltage on the charge circuits. That means more consistent charging performance for your radios.

Q: Is this cradle suitable for a fixed workshop or station base?

Yes, it is intended as a desktop or benchtop unit. The flat base sits well on a counter or shelf where radios are stored between jobs. A fixed location means everyone knows where the handhelds live. That helps keep the comms kit ready for use around the property or on trips.

• Compatible with GME TX685 handheld UHF radios

• Compatible with GME TX6150 handheld UHF radios

• Compatible with GME TX6155 handheld UHF radios

• Compatible with GME TX6160 handheld UHF radios

• Requires GME AC adaptor model PS002 (12 V DC, 1 A)

• Suits desktop or benchtop mounting for fixed charging location