The GME Medium Duty Antenna Spring sits between your elevated-feed antenna base and mount, taking the shock when the whip hits branches or carpark beams. The medium duty rating suits common UHF setups on bullbars and guards where antenna height sits around 1.0–1.5 metres above ground. The stainless finish helps the spring shake off red dust and road grime after long days between towns.

The stainless steel construction is sized for elevated-feed antenna bases that use a matching threaded connection, giving a solid metal-to-metal join without plastic spacers. The compact body makes it handy on tighter bar work where you only have a few centimetres to play with around lights and brackets. The spring comes as a single piece, so you just match it to the correct GME base and get out there without chasing extra hardware.

• Medium duty antenna spring for UHF setups
• Suits GME elevated-feed antenna bases
• Classified as a radio accessory component
• Stainless steel finish for corrosion resistance
• Helps protect antenna and mount from impacts
• Compact straight-coil body suits bullbar mounts
• Compatible with threaded elevated-feed style bases
• Supplied as spring only with no extra hardware
• Suitable for 4x4 and touring communications installs
• Simple upgrade for existing GME antenna gear

Q: Does this spring include an antenna or base?

No, this is the spring only. You pair it with a compatible elevated-feed antenna base and whip from your existing setup or a new kit. This keeps costs down if you just want to upgrade the mounting point. It also lets you choose the antenna gain and length that suits your driving.

Q: Is this classed as light, medium, or heavy duty?

This spring is classed as medium duty. That suits most everyday touring antennas rather than very short stubs or very heavy long whips. Medium duty is a good match for general 4WD and ute setups. It balances flex and support without being too stiff or too soft.

Q: What type of gear is this spring intended for?

This spring is supplied as a radio accessory for UHF antenna installations. It works as the flexible link between the mount point and an elevated-feed base. That helps manage knocks and vibration while still keeping the antenna upright. It is suited to vehicles running UHF communications on road and off road.

Q: Can I use this spring on a vehicle bullbar mount?

Yes, it is suitable when paired with a compatible elevated-feed antenna base on a bullbar mount. The stainless finish handles exposure on the front of the vehicle. The medium duty rating suits the wind load from highway speeds. Just check your existing bracket has the correct thread for the spring connection.

• Suits GME elevated-feed antenna bases
• Intended for mounting UHF antennas using compatible elevated-feed bases
• Suitable for antenna installations on vehicles with compatible mounting hardware