This GME 2.5mm Stainless Steel Mirror Mount Bracket gives you a solid spot for your antenna beside the mirror so the whip clears the cab and bar work. The 2.5mm plate and clamp layout keep the gear stable when the mount cops constant vibration from corrugations. The cable slot lets you run coax through the bracket so the sheath does not rub on sharp edges during long days on the highway. The bracket is stainless steel at 2.5mm thickness so it stands up to coastal salt and red dust without flaking. The stainless finish matches most factory mirror arms and bullbars for a tidy setup that still works hard. The clamp uses multiple stainless bolts so pressure spreads across roughly 40–60 mm of mirror arm. That means less chance of crushing thin tube while still holding a standard touring antenna steady when you get out there.

• GME mirror mount bracket for antennas

• Manufactured from 2.5mm stainless steel plate

• Stainless steel finish for corrosion resistance

• Integrated cable slot for tidy coax routing

• Clamp design suits suitable mirror arms

• Supplied as bracket only with hardware

• Compact form keeps roof rack space free

• Suitable for common touring communication setups

• Strong plate thickness helps resist flex

• Ideal for vehicles needing mirror-mounted whips

Q: Can this mirror mount bracket be used on either side of the vehicle?

Yes, the bracket can be mounted on either side. The clamp style and open cable slot allow it to fit to a suitable mirror arm regardless of orientation. Just match the clamp area to a straight section of arm. Tighten the bolts evenly so the load spreads across the 2.5mm plate and mirror tube.

Q: Does the bracket include mounting bolts and nuts?

Yes, the bracket comes with fixed bolts and nuts as shown. The hardware is stainless steel to match the 2.5mm plate, so threads stay useable after exposure to rain and road grime. You only need tools to tighten the supplied fasteners. No extra clamp hardware is required for normal installation.

Q: What type of antenna is this bracket typically used with?

This mirror mount bracket is typically used with UHF or similar communication antennas. The slot and top profile suit standard stud-mount bases found on common GME and other touring whips. The 2.5mm stainless plate provides enough strength for everyday voice comms setups. Always match antenna weight and length to vehicle mirror strength.

Q: Is the stainless finish suitable for coastal environments?

Yes, the stainless steel construction is suitable for coastal conditions. The bare stainless surface resists rust better than painted mild steel on vehicles that see salt spray or beach towing. Regular rinsing still helps remove salt crystals. With basic care, the 2.5mm stainless plate and hardware can handle long-term outdoor exposure.