This GME 2.0mm antenna mounting bracket gives your Hilux guard a solid spot to run a UHF antenna without crowding the bull bar. The 2.0 mm thick plate keeps the antenna base steady when the track turns to corrugations or bulldust. The black finish blends in along the guard so the setup looks tidy rather than bolted together from leftovers. The bracket is pressed from metal about 2.0 mm thick with a shaped bend that lines up with the Hilux guard. Twin lower fixing holes of roughly 6–8 mm let you bolt through with suitable hardware for a firm clamp. The slotted top cut-out suits common UHF bases with a central stud size around 16–20 mm. The black coated surface handles sun, grit and road spray across long highway runs, which makes this bracket a smart buy for regular touring.

• GME 2.0mm antenna mounting bracket
• Suits Toyota Hilux guard installations
• Bracket only supplied, no hardware
• 2.0 mm thick metal construction
• Black coated finish for low‑glare look
• Slotted top hole for antenna base
• Twin lower mounting holes for fixing
• Compact guard-mount design for UHF antennas
• Suitable for general touring and daily use
• Simple way to add a guard-mounted antenna

Q: Does this bracket include the antenna and mounting hardware?

No, this bracket is supplied as the bracket only. You will need to use a suitable UHF or communication antenna with its own base. Appropriate bolts or fasteners for the Hilux guard also need to be sourced separately. This keeps the kit flexible so you can match it with your preferred antenna gear.

Q: Where on the Toyota Hilux does this bracket usually mount?

This bracket is intended for mounting on the guard of a Toyota Hilux. Most setups position the bracket near the front corner of the guard so the antenna clears the bonnet line. Exact placement depends on existing holes or your preferred drilling position. Always check bonnet and door clearance before final tightening.

Q: Is the bracket suitable for use with bull bars or only the guard?

This model is described as a guard-mount antenna bracket for the Toyota Hilux. It is shaped to sit along the guard panel, not a bull bar tube. If you are running a bull bar mount, a different style of bracket may be better suited. Matching the bracket shape to the mounting surface helps keep the antenna stable.

Q: What type of antennas typically suit this bracket?

The bracket is intended for UHF or communication antennas that use a stud-style base. The slotted circular cut-out at the top allows the antenna cable and stud to pass through. Most common 4WD UHF aerial bases fall into this style. Always confirm the stud and washer size against the hole before tightening to avoid damage.

• Suits Toyota Hilux guard mounting locations
• Intended to mount a UHF or communication antenna to vehicle guard
• Bracket only supplied so separate antenna and mounting hardware may be required
• Installation method depends on existing guard mounting points on the Toyota Hilux