This GME 2.0mm Antenna Mounting Bracket is made for Hilux drivers who want their comms gear on the guard instead of the roof. The 2.0 mm stainless plate keeps the antenna base steady when you hit corrugations or sit on 110 km/h highway runs. The slotted top suits standard antenna bases, so you can line the mast up clear of mirrors and bar work without strange angles. The bracket uses 2.0 mm stainless steel so it stands up to red dust, mud and coastal spray on long trips. The stainless finish shrugs off stone spray and regular wash downs better than thin painted steel on tracks longer than 200 km. The pre punched holes match the Hilux guard mount pattern, so you pair it with suitable fasteners and get out there. It is simple, solid gear and a smart buy for tidy antenna mounting.

• GME antenna mounting bracket for Toyota Hilux
• Manufactured from 2.0 mm stainless steel
• Stainless construction resists rust and corrosion
• Guard mount style bracket for antenna bases
• Pre formed bend suits Hilux guard profile
• Slotted top section for antenna base stud
• Lower section includes two pre drilled holes
• Bracket only supplied, antenna not included
• Suitable for UHF or similar antenna hardware
• Compact shape keeps antenna load close to guard

Q: Does this bracket include the antenna or mounting hardware?

No, this bracket is supplied as the bracket only. This lets you match it with the exact antenna and hardware you prefer. You can pair it with a UHF, AM/FM or other compatible base that suits your setup. Just use fixings that suit the Hilux guard and your chosen antenna base.

Q: Is the bracket suitable for coastal or beach driving conditions?

Yes, the bracket is made from stainless steel. Stainless steel handles salt spray and moisture better than painted mild steel in normal use. It is a good choice if your Hilux sees regular beach access or boat ramp work. Regular rinsing with fresh water will still help keep the finish looking clean.

Q: Can this bracket be used on vehicles other than a Toyota Hilux?

It is specified as suiting Toyota Hilux. The hole positions and bend angles are made around the Hilux guard profile. Other vehicles may not share the same mounting pattern or panel shape. For non Hilux vehicles, check dimensions carefully or use a bracket listed for that model.

Q: Where on the Hilux does this bracket generally mount?

The bracket is intended for a guard mount position. It is shaped to sit along the edge of the front guard panel near the bonnet line. This position gives the antenna good height without going above roof bars by a large margin. Exact mounting location may vary slightly with accessories like bull bars or snorkels.

• Suits Toyota Hilux guard mount applications
• Intended for mounting an antenna to the vehicle body
• Requires compatible antenna hardware and fasteners
• Install location and method depend on vehicle and antenna choice