This Coast to Coast gas hose steps between a 3/8 inch BSP male fitting and a 1/4 inch BSP female fitting across a 900mm run so you can hook up stoves or grills that sit close to the bottle. That 900mm length works well on a drawbar or tunnel boot setup where the gas bayonet or outlet sits less than a metre from the cooking gear. You get simple BSP threads that most caravan and RV gas fittings already use. The hose runs a fixed 900mm so routing stays tidy without big loops hanging under the chassis. Metal ends in 3/8 inch BSPM and 1/4 inch BSPF give a solid thread match with standard camping and touring appliances. The general purpose gas hose spec suits typical LPG setups across caravans and RVs that need a short link between the regulator and appliance. You get straightforward gear that just fits and lets you get out there.

• Coast to Coast general purpose gas hose
• 3/8" BSP male connection at one end
• 1/4" BSP female connection at opposite end
• Fixed hose length of 900mm
• Suits caravan and RV LPG setups
• Handy link between regulator and appliance
• BSP threads match common Aussie gas fittings
• Ideal when appliance sits within 1m of bottle
• Compact length helps reduce pressure loss
• Suitable where general purpose gas hose is specified

Q: Can this gas hose be used as the main supply line through a caravan?

No, this 900mm gas hose is suited to short appliance links rather than full-length supply lines. Caravan main supply lines are usually hard pipe or specific long-run hose specified by a licensed gas fitter. This hose works best between a nearby regulator and a single appliance inlet. Always follow Australian gas standards and use a licensed fitter for fixed installations.

Q: Do I need thread tape on the 3/8" BSPM and 1/4" BSPF connections?

Use only the sealing method specified for your gas fittings. Many gas hose assemblies and regulators use pre-formed seats or cones where thread tape is not required and can interfere with sealing surfaces. Check the markings on your regulator and appliance and follow their instructions. If the connection type is unclear, get a licensed gas fitter to install the hose.

Q: Is this hose suitable for both indoor and outdoor use on a caravan?

The hose is supplied as a general purpose gas hose for caravan and RV applications where the length and BSP threads match. Placement, shielding and indoor or outdoor routing must comply with gas installation rules. A licensed gas fitter can confirm suitable routing, clearances and ventilation for your specific setup. Never run flexible hose where heat or abrasion can damage the outer cover.

Q: Can I connect this hose directly to a barbecue on a house patio?

You can use the hose only where the barbecue and gas supply both use compatible 3/8" BSP male and 1/4" BSP female connections and local rules allow it. Many household barbecues use different fittings or bottled gas systems, so always check the appliance plate and regulator. If you are unsure about thread type or approval, ask a gas fitter or refer to the barbecue manufacturer’s instructions.

This gas hose suits setups that use a 3/8" BSP male connection at one end and a 1/4" BSP female connection at the other end. The 900mm length suits compact caravan and RV gas layouts where appliances sit close to the regulator or main line. Use only with compatible gas regulators and appliances that match these BSP thread sizes. Installation and leak testing must follow relevant gas fitting standards and local regulations.