The Fusion Dust Cover 010-12743-01 drops straight over the Apollo MS-RA800 face and keeps dust off the screen when the boat sits parked. The front panel spans roughly 18 cm by 7 cm so it covers the full stereo height on most standard helm cut-outs. The knob recess lines up with the MS-RA800 dial at about 4 cm across so it stays put when you are punching through chop. The cover comes in a large size marked as Large so you get decent overlap around the radio body on dashes from about 80 mm to 110 mm high. The panel thickness sits near 3 mm which gives a bit of stiffness when gear brushes past. The solid face suits enclosed helms where spray is minimal but dust and grit still build up. It is a smart buy if you want your stereo buttons working trip after trip.

• Genuine Fusion accessory dust cover
• Suits Fusion Apollo MS-RA800 marine stereo
• Large size cover for full face protection
• Simple slip-on design for daily use
• Helps keep dust off screen and controls
• Solid front panel helps resist minor knocks
• Neat low-profile look on the helm
• Ideal for boats stored outdoors or on trailers
• Supports longer life for stereo front panel
• Black finish matches most marine dash layouts

Q: Does this dust cover fit any other Fusion stereos?

This dust cover is specified for the Fusion Apollo MS-RA800 only. The shape and knob position match that single faceplate. Other Fusion stereos use different layouts and dimensions. Using it on another model may leave parts of the screen or buttons exposed. For other stereos you will need the matching model-specific cover.

Q: Can I leave the dust cover on while the stereo is turned on?

You can leave it on but you will not be able to see or operate the controls. The cover blocks access to the screen and buttons. Most skippers remove it before powering up the stereo. That way you can clearly see volume levels and source settings while underway.

Q: Is this cover suitable for use on open boats?

The cover is suitable for protecting the MS-RA800 from dust on open boats where the stereo is mounted in a sheltered position. It helps reduce grit build-up from road travel and storage. It does not turn the stereo into a waterproof unit. You should still mount the radio in a location suited to your hull and conditions.

Q: How should I clean the Fusion dust cover?

Wipe the dust cover with a damp cloth and mild soapy water. Avoid harsh solvents or abrasive pads as they can mark the surface. Rinse with clean water and let it dry before refitting. Regular cleaning stops grit from scratching the stereo face when you put the cover on and off.

• Compatible only with Fusion Apollo MS-RA800 marine stereo