The Fusion Apollo Subwoofer Grille is a 10 inch white shielded cover that clips over a matching Fusion marine sub. The mesh face spans the full 10 inch diameter so the cone sits behind a solid barrier when the boat slaps through 1 metre chop and loose gear moves around. The perforations are only a few millimetres across so they keep out bigger deck rubbish while still letting the low frequencies breathe.

The frame runs six main spokes across the 10 inch circle to spread any knocks over a wider area instead of into one point on the cone. The white finish lines up well with light gelcoat cabins and hardtops that cop full sun for 6–8 hours a day. The grille suits Apollo series 10 inch subwoofers with standard marine mounting patterns so you can swap it straight over existing hardware.

• Genuine Fusion Apollo subwoofer grille
• Suits standard 10 inch Fusion subs
• Shielded design helps guard the cone
• White finish complements marine interiors
• Perforated mesh maintains airflow and sound
• Six spoke frame spreads impact forces
• Circular design covers full driver face
• Ideal for replacing damaged or aged grilles
• Single grille supplied per package
• Purpose-built for marine entertainment systems

Q: Is this grille only for Fusion Apollo 10 inch subwoofers?

Yes, it is specified for Fusion Apollo 10 inch marine subwoofers. The mounting pattern and diameter are made to line up with that range so the grille seats correctly on the basket. Using it on different subs may leave mounting holes exposed or interfere with cone clearance. Sticking with the matching Apollo model keeps the fit and finish tidy.

Q: Does the grille affect subwoofer sound output?

The grille is perforated to minimise impact on sound. The mesh uses many small openings so air from cone movement still passes through the face. There can be a slight change at very high volume due to the physical barrier. For normal listening levels in open boat spaces the difference is usually minor while protection is improved.

Q: Can this white grille be repainted a different colour?

It can be repainted if suitable marine-grade paint is used. The surface should be cleaned and lightly keyed before any coating goes on. Using paint that adheres to plastics will help avoid peeling. Extra paint thickness over the mesh holes should be kept low so airflow is not blocked.

Q: Is this grille sold as a single unit or a pair?

This grille is supplied as a single unit. Most setups only run one 10 inch subwoofer in a given enclosure so a single replacement keeps costs down. If a boat carries two subs then two grilles need to be ordered. Checking the number of subwoofers on board before purchase avoids delays.