The Fusion Acc RJ45 FF Network Extension Adapter lets you join two RJ45 leads when your Fusion stereo network run comes up short by a connector length. This little bit of gear uses standard 8 pin RJ45 ends so it drops into existing cables without rewiring. You can shift a head unit or zone amp by a few hundred millimetres without dragging a fresh 5 m cable through the boat. The adapter houses twin female RJ45 sockets in a compact block under about 30 mm long so it tucks behind dash panels and into narrow cable chases. Straight through contact layout keeps all 8 conductors aligned for clean data flow between Fusion components. The solid outer shell helps protect the joint from knocks around the helm in typical Aussie chop. For a small bit of kit it is a smart buy for tidying Fusion network setups.

• Fusion RJ45 female to female network extension adapter
• Joins two RJ45 terminated network cables
• Suits Fusion marine entertainment and stereo systems
• Straight through pin layout across all 8 conductors
• Passive coupler requires no external power
• Compact block format fits tight helm spaces
• Handy fix when an existing cable run is slightly short
• Compatible with standard RJ45 patch leads
• Solid outer body helps protect internal contacts
• Ideal for permanent behind dash network joins

Q: Is this adapter directional or can it be used either way?

The adapter can be used either way. Both ends are standard RJ45 female sockets wired in a straight through pattern. You just plug one cable into each side. There is no in or out marking to worry about. As long as both cables use normal RJ45 pinouts the connection will pass through.

Q: Can I use this adapter with standard RJ45 patch leads from an IT store?

Yes it accepts standard RJ45 plugs. The sockets are the same size and shape as regular network jacks used on IT patch leads. That makes it simple to mix off the shelf cables with Fusion marine stereo gear. Just keep cable runs sensible for your network hardware limits.

Q: Does the adapter need any power or configuration?

No power or setup is required. The adapter is a passive coupler that just connects matching pins between the two sockets. There are no switches or software settings to adjust. Once both plugs click in the path is made and the network devices handle the rest.

Q: Is this suitable for permanent installation behind a dash panel?

Yes it suits fixed installations where the joined cables remain mostly static. The small block shape lets it sit in a cavity behind a dash or locker panel. Securing the cables with strain relief clips will help reduce movement at the plugs. That keeps the join stable long term in a boat environment.