The Camec Flange 5/8" – 16mm Rail Oval Shape is the little bit of gear that keeps a coffee tray rail where you want it. It takes a 16 mm rail and locks it to the cabinet with two screws through the oval base. You can bolt it to a small table end or cupboard side and know the tray has a fixed anchor when the van is bouncing down corrugated tracks.
This bit of kit uses a steel body with a chrome plated finish around the 16 mm bore and base. The oval footprint gives more contact area than a tiny round bracket, which helps spread the load into thin caravan furniture boards. Two mounting holes keep the rail from twisting under day to day knocks. If you are tidying up a coffee tray setup, this flange is a smart buy that just works.
- Camec steel flange for coffee tray rails
- Suits 5/8" (16mm) diameter rail
- Oval base for wider load spread
- Two mounting holes for secure fixing
- Chrome plated finish for clean look
- Compatible with caravan and RV furniture
- Ideal for small coffee trays and tables
- Compact hardware fits tight cabinetry spaces
- Simple replacement part for existing setups
- Matches standard caravan table rail hardware
Q: Does this flange fit standard 5/8" coffee tray rails?
Yes, it is made to suit 5/8" (16mm) rails. This size is common on many caravan coffee tray and small table setups. Matching the rail diameter is important so the tube sits snug without rattle. If your rail measures around 16mm across, this flange will suit. Always measure the outside diameter of the rail before ordering.
Q: What material is the Camec flange made from?
The flange is made from steel with a chrome plated finish. Steel gives solid strength for supporting light furniture loads in a van. The chrome plating adds a smooth surface that is easy to wipe clean. It also offers basic corrosion resistance in humid interiors. This combination works well around kitchens and dinettes where moisture is common.
Q: Where is this flange typically used in a caravan?
It is typically used to mount coffee tray or small table rails. You will usually see it fixed to a cabinet side, end panel, or wall near the dinette. The rail passes through the flange to support a slide-out or removable tray. It keeps the tray aligned and helps carry the weight back into the furniture frame. It is suited to caravan and RV interior use.
Q: How is the flange attached to the furniture panel?
The flange mounts with screws through the two holes in the oval base. You choose screw length and type to suit your panel material. For thin caravan cabinetry, wood screws into timber or ply are common. The two-hole layout helps stop the flange from rotating under load. Always pre-drill pilot holes where needed to avoid splitting the panel.
- Suits coffee tray rails using a 5/8" (16mm) rail
- Mounts via two screw holes on the oval base
- Intended for caravan and RV furniture and table hardware
- Typically used to locate and support coffee tray or small table rails
- 16mm rail fit for coffee trays
- Steel body made to last
- Chrome finish handles caravan use
- Oval base grips thin furniture boards
- Simple bracket to tidy rail setups
- Product type: Flange
- Application: To suit coffee tray rails
- Rail compatibility: 5/8" (16mm) rail
- Shape: Oval base
- Material: Steel
- Finish: Chrome plated
- Brand: Camec
- 1 x Camec flange to suit 5/8" (16mm) oval rail
| SKU | 008202-A |
|---|---|
| Barcode # | 008202-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
More info
The Camec Flange 5/8" – 16mm Rail Oval Shape is the little bit of gear that keeps a coffee tray rail where you want it. It takes a 16 mm rail and locks it to the cabinet with two screws through the oval base. You can bolt it to a small table end or cupboard side and know the tray has a fixed anchor when the van is bouncing down corrugated tracks.
This bit of kit uses a steel body with a chrome plated finish around the 16 mm bore and base. The oval footprint gives more contact area than a tiny round bracket, which helps spread the load into thin caravan furniture boards. Two mounting holes keep the rail from twisting under day to day knocks. If you are tidying up a coffee tray setup, this flange is a smart buy that just works.
- Camec steel flange for coffee tray rails
- Suits 5/8" (16mm) diameter rail
- Oval base for wider load spread
- Two mounting holes for secure fixing
- Chrome plated finish for clean look
- Compatible with caravan and RV furniture
- Ideal for small coffee trays and tables
- Compact hardware fits tight cabinetry spaces
- Simple replacement part for existing setups
- Matches standard caravan table rail hardware
Q: Does this flange fit standard 5/8" coffee tray rails?
Yes, it is made to suit 5/8" (16mm) rails. This size is common on many caravan coffee tray and small table setups. Matching the rail diameter is important so the tube sits snug without rattle. If your rail measures around 16mm across, this flange will suit. Always measure the outside diameter of the rail before ordering.
Q: What material is the Camec flange made from?
The flange is made from steel with a chrome plated finish. Steel gives solid strength for supporting light furniture loads in a van. The chrome plating adds a smooth surface that is easy to wipe clean. It also offers basic corrosion resistance in humid interiors. This combination works well around kitchens and dinettes where moisture is common.
Q: Where is this flange typically used in a caravan?
It is typically used to mount coffee tray or small table rails. You will usually see it fixed to a cabinet side, end panel, or wall near the dinette. The rail passes through the flange to support a slide-out or removable tray. It keeps the tray aligned and helps carry the weight back into the furniture frame. It is suited to caravan and RV interior use.
Q: How is the flange attached to the furniture panel?
The flange mounts with screws through the two holes in the oval base. You choose screw length and type to suit your panel material. For thin caravan cabinetry, wood screws into timber or ply are common. The two-hole layout helps stop the flange from rotating under load. Always pre-drill pilot holes where needed to avoid splitting the panel.
- Suits coffee tray rails using a 5/8" (16mm) rail
- Mounts via two screw holes on the oval base
- Intended for caravan and RV furniture and table hardware
- Typically used to locate and support coffee tray or small table rails
- 16mm rail fit for coffee trays
- Steel body made to last
- Chrome finish handles caravan use
- Oval base grips thin furniture boards
- Simple bracket to tidy rail setups
- Product type: Flange
- Application: To suit coffee tray rails
- Rail compatibility: 5/8" (16mm) rail
- Shape: Oval base
- Material: Steel
- Finish: Chrome plated
- Brand: Camec
- 1 x Camec flange to suit 5/8" (16mm) oval rail
| SKU | 008202-A |
|---|---|
| Barcode # | 008202-A |
| Brand | Camec |
| Shipping Weight | 0.5000kg |
