This Sam Allen Extension Lead Plug & Socket 12/24V 5M Heavy Duty adds a handy 5 m reach to your 12 volt kit so you can park the ute and still power gear at the camper drawbar. The cable runs a single circuit at 12 V for fridges and camp lights that stay within normal accessory current. The plug and socket suit standard 12 volt outlets so you can swap the lead between vehicles and boats. The lead uses heavy duty twin core cable along the full 5 m length so voltage drop stays controlled over a typical camp setup. The housings on the plug and socket use solid plastic with ribs moulded into the sides for grip when you disconnect. The rating of 12 V matches standard car and 4WD systems and the 1 year warranty shows the gear is made for regular touring use. Call it a smart buy if you need simple 12 volt reach.

• Sam Allen heavy duty extension lead
• Part number 53031 for easy reference
• 5 metre overall lead length
• 12V rating for standard vehicle systems
• Suits DIY marine and camper projects
• Standard style plug to 12V socket connection
• Handy for powering accessories away from vehicle
• Heavy duty cable helps limit voltage drop
• Backed by a 1 year warranty
• Portable lead for temporary power runs

Q: Can this extension lead be used on a 24V system?

The lead is listed at 12V, although the product name references 12/24V. The plug and socket follow the common 12V accessory style used in many vehicles. Some 24V setups use the same style outlet which is why 12/24V appears in the name. Always match the current draw of your gear to the wiring and fuse size on your vehicle. If you are running 24V gear, have an auto electrician check compatibility.

Q: Is this lead suitable for permanent outdoor installation on a trailer?

It is intended as a portable extension lead rather than a fixed cable. The plastic plug and socket are fine for normal outdoor use when in service but are not built as a hard-wired trailer loom. For a permanent trailer circuit you would usually run dedicated automotive cable and fixed sockets. Use this lead as removable gear and store it out of the weather when not in use.

Q: Can I run a 12V fridge through this 5 m lead?

You can use it for many portable 12V fridges, provided current draw stays within accessory limits. The heavy duty cable helps control voltage drop over the 5 m length. Keep total load within what your vehicle socket and fuse are rated to handle. Check the amp draw on the fridge plate before use. If the fridge is high draw or used constantly, consider a dedicated hard-wired circuit.

Q: Does the lead include any in-line fuse protection?

The description does not state an in-line fuse in the cable itself. Most vehicles already protect their accessory sockets with a fuse in the factory wiring. If you plan to power high value gear like fridges or electronics, it is good practice to confirm your socket fuse rating. Adding a separate fused outlet or distribution box near the battery can improve protection and reduce voltage drop on more involved setups.