Enerdrive Epower 2000W 12V Inverter With Rcd & Ac Transfer Switch

Description

Power Reliable Gear on the Road or at Camp

The Enerdrive 2000W Inverter (EN1120S-X) converts 12V DC power into clean, stable 230V AC power for your caravan, camper trailer, 4WD, or boat. Using advanced true sine wave technology, it delivers steady power for appliances like microwaves, laptops, power tools, and TVs while you travel.

This model includes an integrated 16A AC transfer switch for smooth power transition between mains, generator, and inverter sources. A built-in RCD safety switch adds extra protection by cutting power within milliseconds if a fault occurs. Both features make the system simple to install and safe to use on the road.

Built for long service life, the Enerdrive 2000W inverter runs quietly and has a compact design with a removable LED remote panel. It meets Australian standards and comes with Enerdrive’s trusted 5-year warranty for lasting reliability on every trip.

Key Features

2000W true sine wave output – safe for sensitive electronics
Seamless 16A AC transfer switch for uninterrupted power
RCD safety switch with test button
LED remote control panel (removable)
USB port for small device charging
Silent operation and compact design
Complies with Australian and CE standards
Backed by a 5-year warranty

Estimated Run Time on Load (12V Battery Bank)

AC Load	60Ah	120Ah	180Ah	240Ah	300Ah
50W	11 hrs	22 hrs	33 hrs	44 hrs	55 hrs
100W	5 hrs	11.5 hrs	17 hrs	23 hrs	29 hrs
200W	2.5 hrs	5 hrs	8 hrs	11 hrs	13.5 hrs
500W	49 mins	2 hrs	3 hrs	4 hrs	5 hrs
1000W	15 mins	49 mins	1.5 hrs	2 hrs	2.5 hrs
1500W	8 mins	27 mins	49 mins	1 hr	1.5 hrs
2000W	N.R.	15 mins	34 mins	49 mins	1 hr

Model – Description	EN1120S-X
AC Output Power	2000W
AC Output Current	8.7A
AC Output Voltage	230 Vac / 50 Hz
AC Output Waveform	Sinewave (<3% THD)
Nominal DC Input Voltage	12.5 VDC
No Load battery draw	< 1.5 ADC
DC Input Voltage operating range	10.5 – 15.5 VDC
Under Voltage Alarm	11.0 / 12.1 VDC
Under Voltage Alarm Recovery	11.3 / 12.3 VDC
Under Voltage Shutdown	10.5 / 11.8 VDC
Under Voltage Shutdown Recovery	12.0 / 12.6 VDC
Over Voltage Shutdown	15.5 VDC
USB Port	5V, 2.1A
AC Transfer Switch
Transfer Time	< 30 ms
Transfer Relay Rating	16A (resistive load)
AC Input socket IEC-C20	16A max
AC Output socket IEC-C19	16A max
AC Output Front GPO	10A max
Safety and Environmental
Conformance	All required Australian Standards , CE LVD: EN/IEC 62040-1, IEC61558-2-16
EMI / EMC	CE EMC: EN/IEC 62040-2 category C1
Agency Markings	RCM , CE
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Relative Humidity	5-90% non-condensing
Operating Altitude	Up to 3000 meters above sea level
Weights and Dimensions
Weight	5.9 kg
Dimensions (W x L x H)	435x230x115 mm
Warranty	5 Years

Enerdrive Inverter Comparison: 2000W 12V (EN1120S-X) vs 2000W 24V (EN1120S-X-24V) vs 2600W 12V (EN1226S-X)

Specification	2000W 12V (EN1120S-X)	2000W 24V (EN1120S-X-24V)	2600W 12V (EN1226S-X)
AC Output Power	2000W	2000W	2600W
AC Output Current	8.7A	8.7A	11.3A
AC Output Voltage	230 Vac / 50 Hz	230 Vac / 50 Hz	230 Vac / 50 Hz
AC Output Waveform	Sinewave (<3% THD)	Sinewave (<3% THD)	Sinewave (<3% THD)
Nominal DC Input Voltage	12.5 VDC	24.5 VDC	12.5 VDC
No Load Battery Draw	< 1.5 ADC	< 1.5 ADC	< 1.5 ADC
DC Input Voltage Operating Range	10.5 – 15.5 VDC	21.0 – 31.0 VDC	10.5 – 15.5 VDC
Under Voltage Alarm	11.0 / 12.1 VDC	22.0 / 24.2 VDC	11.0 / 12.1 VDC
Under Voltage Alarm Recovery	11.3 / 12.3 VDC	22.6 / 24.6 VDC	11.3 / 12.3 VDC
Under Voltage Shutdown	10.5 / 11.8 VDC	21.0 / 23.6 VDC	10.5 / 11.8 VDC
Under Voltage Shutdown Recovery	12.0 / 12.6 VDC	24.0 / 25.2 VDC	12.0 / 12.6 VDC
Over Voltage Shutdown	15.5 VDC	31.0 VDC	15.5 VDC
USB Port	5V, 2.1A	5V, 2.1A	5V, 2.1A

AC Transfer Switch

Specification	2000W 12V	2000W 24V	2600W 12V
Transfer Time	< 30 ms	< 30 ms	< 30 ms
Transfer Relay Rating	16A (resistive load)	16A (resistive load)	16A (resistive load)
AC Input Socket (IEC-C20)	16A max	16A max	16A max
AC Output Socket (IEC-C19)	16A max	16A max	16A max
AC Output Front GPO	10A max	10A max	10A max

Safety and Environmental

Specification	2000W 12V	2000W 24V	2600W 12V
Conformance	All required Australian Standards, CE LVD: EN/IEC 62040-1, IEC61558-2-16	All required Australian Standards, CE LVD: EN/IEC 62040-1, IEC61558-2-16	All required Australian Standards, CE LVD: EN/IEC 62040-1, IEC61558-2-16
EMI / EMC	CE EMC: EN/IEC 62040-2 category C1	CE EMC: EN/IEC 62040-2 category C1	CE EMC: EN/IEC 62040-2 category C1
Agency Markings	RCM , CE	RCM , CE	RCM , CE
Operating Temperature	0°C to 40°C	0°C to 40°C	0°C to 40°C
Storage Temperature	-20°C to 60°C	-20°C to 60°C	-20°C to 60°C
Relative Humidity	5–90% non-condensing	5–90% non-condensing	5–90% non-condensing
Operating Altitude	Up to 3000 m above sea level	Up to 3000 m above sea level	Up to 3000 m above sea level

Weights and Dimensions

Specification	2000W 12V	2000W 24V	2600W 12V
Weight	5.9 kg	5.9 kg	7.0 kg
Dimensions (W × L × H)	444 × 230 × 115 mm	444 × 230 × 115 mm	560 × 230 × 115 mm
Warranty	5 Years	5 Years	5 Years

Specifications

SKU	EN1120S-X
Barcode #	9342616000298
Brand	Enerdrive
Shipping Weight	7.9000kg
Assembled Length	0.440m
Assembled Height	0.120m
Assembled Width	0.230m

Instructions

Download Instructions

Enerdrive Epower 2000W 12V Inverter With Rcd & Ac Transfer Switch

SKU: EN1120S-X

$1,544.00

REG

$1,208.00 SALE

Unlock Mates'Rate and Save. Login or Join Free

SAVE $336.00

REG $1,544.00

Earn 12,080 GEAR'd Points

FINAL DAYS - Black Friday Sale Ends Monday

SALE ENDS

Ships in 7 days