The Easterner portable hand operated bilge pump at 61 cm gives you a simple way to clear water from small boats when power is not an option. The 600 mm barrel works well in dinghies and tinnies where space between seats sits under 700 mm. The 32 mm outlet hose shifts a decent volume with each stroke so you can tackle pooled water after rain or waves over the bow. The barrel runs a rigid plastic body that shrugs off knocks against alloy or fibreglass floors. The PVC hose measures 32 mm by 600 mm so it reaches over the gunwale without crimping. The corrosion free build suits long term use around salt and brackish water. The hand grip and straight shaft make it a smart buy as backup gear alongside any 12 volt bilge setup on Aussie waterways.
- Portable hand operated bilge pump for marine use
- Suited to dinghies small boats and backup duties
- Barrel length specified at 600 mm
- Overall pump length approximately 61 cm
- Outlet hose diameter rated at 32 mm
- Outlet hose length supplied at 600 mm
- Constructed from rigid plastic barrel material
- Flexible PVC outlet hose for discharge
- Corrosion free design suitable for saltwater
- Compact lightweight gear for simple storage
Q: Does this bilge pump need any power source?
No it runs purely by hand. The pump uses a manual plunger over the 600 mm barrel so you control the stroke speed. This means you can still move water if the battery is flat or the electrics fail. It also keeps the setup simple with no wiring or fuses to worry about.
Q: What size outlet hose does this pump use?
The pump uses a 32 mm outlet hose. The hose supplied is 32 mm in diameter and 600 mm long which suits short discharge runs over the gunwale. This diameter gives a solid flow rate for each stroke without needing adapters. It also matches common 32 mm marine hose fittings on small craft.
Q: Is the construction suitable for use in saltwater?
Yes the pump uses corrosion free materials. The rigid plastic barrel and PVC hose do not rust like metal pumps when exposed to salt spray. This makes it suitable for regular use in coastal environments. A quick rinse in fresh water after trips will help keep the gear in good condition.
Q: How portable is the Easterner hand bilge pump?
The unit is highly portable due to its 61 cm overall length. The 600 mm barrel and attached 600 mm hose are light enough to carry in one hand. The straight design lets it stow under seats or along the side of a dinghy. This makes it handy backup gear for hire boats or secondary craft on a larger vessel.
- Simple hand pump backup bilge gear
- 600 mm barrel fits cramped hulls
- 32 mm PVC hose handles discharge
- Rigid plastic body shrugs off knocks
- Corrosion free build suits salty water
- Smart buy for small dinghy setups
- Brand: Easterner
- Type: portable hand operated bilge pump
- Overall barrel length: 600 mm
- Outlet hose diameter: 32 mm
- Outlet hose length: 600 mm
- Construction materials: rigid plastic barrel and PVC hose
- Application: dinghies small boats or backup bilge pump
- Corrosion free construction for marine use
- Operation: manual hand pump action
- 1 x Easterner portable hand operated bilge pump with 600 mm barrel
- 1 x flexible outlet hose 32 mm diameter x 600 mm length
| SKU | 131060 |
|---|---|
| Barcode # | 9319786264706 |
| Brand | Easterner |
| Shipping Weight | 0.8200kg |
| Assembled Length | 0.835m |
| Assembled Height | 0.068m |
| Assembled Width | 0.223m |
The Easterner portable hand operated bilge pump at 61 cm gives you a simple way to clear water from small boats when power is not an option. The 600 mm barrel works well in dinghies and tinnies where space between seats sits under 700 mm. The 32 mm outlet hose shifts a decent volume with each stroke so you can tackle pooled water after rain or waves over the bow. The barrel runs a rigid plastic body that shrugs off knocks against alloy or fibreglass floors. The PVC hose measures 32 mm by 600 mm so it reaches over the gunwale without crimping. The corrosion free build suits long term use around salt and brackish water. The hand grip and straight shaft make it a smart buy as backup gear alongside any 12 volt bilge setup on Aussie waterways.
- Portable hand operated bilge pump for marine use
- Suited to dinghies small boats and backup duties
- Barrel length specified at 600 mm
- Overall pump length approximately 61 cm
- Outlet hose diameter rated at 32 mm
- Outlet hose length supplied at 600 mm
- Constructed from rigid plastic barrel material
- Flexible PVC outlet hose for discharge
- Corrosion free design suitable for saltwater
- Compact lightweight gear for simple storage
Q: Does this bilge pump need any power source?
No it runs purely by hand. The pump uses a manual plunger over the 600 mm barrel so you control the stroke speed. This means you can still move water if the battery is flat or the electrics fail. It also keeps the setup simple with no wiring or fuses to worry about.
Q: What size outlet hose does this pump use?
The pump uses a 32 mm outlet hose. The hose supplied is 32 mm in diameter and 600 mm long which suits short discharge runs over the gunwale. This diameter gives a solid flow rate for each stroke without needing adapters. It also matches common 32 mm marine hose fittings on small craft.
Q: Is the construction suitable for use in saltwater?
Yes the pump uses corrosion free materials. The rigid plastic barrel and PVC hose do not rust like metal pumps when exposed to salt spray. This makes it suitable for regular use in coastal environments. A quick rinse in fresh water after trips will help keep the gear in good condition.
Q: How portable is the Easterner hand bilge pump?
The unit is highly portable due to its 61 cm overall length. The 600 mm barrel and attached 600 mm hose are light enough to carry in one hand. The straight design lets it stow under seats or along the side of a dinghy. This makes it handy backup gear for hire boats or secondary craft on a larger vessel.
- Simple hand pump backup bilge gear
- 600 mm barrel fits cramped hulls
- 32 mm PVC hose handles discharge
- Rigid plastic body shrugs off knocks
- Corrosion free build suits salty water
- Smart buy for small dinghy setups
- Brand: Easterner
- Type: portable hand operated bilge pump
- Overall barrel length: 600 mm
- Outlet hose diameter: 32 mm
- Outlet hose length: 600 mm
- Construction materials: rigid plastic barrel and PVC hose
- Application: dinghies small boats or backup bilge pump
- Corrosion free construction for marine use
- Operation: manual hand pump action
- 1 x Easterner portable hand operated bilge pump with 600 mm barrel
- 1 x flexible outlet hose 32 mm diameter x 600 mm length
| SKU | 131060 |
|---|---|
| Barcode # | 9319786264706 |
| Brand | Easterner |
| Shipping Weight | 0.8200kg |
| Assembled Length | 0.835m |
| Assembled Height | 0.068m |
| Assembled Width | 0.223m |

More info