This Jarvis Walker crab pot float uses a 10 cm white polystyrene body to keep crab pots and bait cages marked on the surface so you can track your spread along a 50–100 m stretch of creek or channel. The float keeps lighter crab pot ropes from sinking once they soak up water, which helps cut down on snagging when working banks from a 4–5 m tinny or small runabout. The expanded polystyrene shell on this float keeps weight down to just a few grams while still providing enough lift for typical estuary pot setups with loads of 2–3 kg. The 10 cm diameter gives a good balance between visibility and storage space in a 40–50 L crate on the deck. The plain white finish suits Aussie light conditions, standing out at typical checking distances of 20–30 m along sheltered water.

• Jarvis Walker white polystyrene crab pot float
• Spherical float with 10cm diameter
• Suits marking crab pots and traps
• Handy for suspending berley or bait cages
• Can function as a simple Dan buoy marker
• Lightweight construction for small boat setups
• Central hole to accept a rope or line
• White finish improves visibility on the water
• Suitable for general estuary and inshore use
• Compact size stores easily in deck crates

Q: Can this 10cm float support a standard recreational crab pot?

Yes, this 10cm polystyrene float can support a typical recreational crab pot setup. The expanded polystyrene provides enough buoyancy for light to medium pots and rope. It is suited to standard estuary and inshore use from a small boat. For unusually heavy gear, multiple floats can be used on the same line.

Q: Will the white polystyrene colour be visible in low light?

The white colour is highly visible in most daylight conditions. It stands out against darker water and weed lines. In heavy chop or at dawn and dusk, visibility still depends on distance and sea state. Many fishos pair the float with coloured rope or extra flags for long-distance visibility.

Q: Can I use this float with a berley or bait cage setup?

Yes, this float suits berley and bait cages suspended near the surface or mid-water. The central hole allows you to run a line through and tie off above the cage. The 10cm diameter gives enough lift for small to medium cages. This keeps the rig at a consistent depth beside the boat.

Q: Is the float suitable for saltwater use?

Yes, the polystyrene material is suitable for typical saltwater use. The closed-cell structure resists waterlogging during repeated drops. Saltwater will not affect buoyancy during normal trips. Rinsing the gear with fresh water after use can help keep ropes and clips in better condition alongside the float.