This CMS Electracom Single Beige 10A Power Outlet with 20A Install Coupler drops straight into caravan or RV 240V setups where you only need one outlet on the run. The outlet handles a standard 10A appliance load on 240V circuits, so it suits chargers, kettles or camp cooking gear on powered sites. The double pole switching is there for caravan-style installs where cutting both active and neutral matters for safety and compliance.

The beige faceplate lines up with common single-gang 240V fittings, so it will not look out of place against caravan wall linings. The included 20A installation coupler matches into 20A-rated wiring, giving you a solid link between the socket and the rest of the system. That means one outlet, a known 10A rating and a clear 20A coupler upstream. It is a smart buy if you want straightforward, matched gear in your 240V kit.

• CMS Electracom single 10A power outlet
• Rated for standard 240V Australian circuits
• Includes matching 20A installation coupler
• Double pole switching isolates active and neutral
• Beige finish to suit common interiors
• Single-gang style plate for compact installs
• Suited to caravan and RV 240V setups
• Ideal as a component in DIY 240V kits
• Compatible with standard three-pin 10A plugs
• Helps keep outlet and wiring ratings aligned

Q: Does this outlet need a licensed electrician to install it?

Yes, installation must be carried out by a licensed electrician. Caravan and RV 240V systems are treated the same as household mains, so Australian standards apply. A licensed electrician will terminate the 20A coupler correctly. That keeps the circuit rating consistent and protects your warranty and insurance.

Q: Is this outlet suitable for standard Australian 3‑pin 240V plugs?

Yes, the outlet accepts standard Australian three‑pin 240V plugs. The socket is rated at 10A so it matches most caravan appliances and chargers. As with any 10A point, do not exceed the current rating. Your electrician should confirm the upstream breaker or RCD matches the outlet rating.

Q: What is the benefit of a double pole switch on this outlet?

The double pole switch isolates both active and neutral conductors. This is commonly used in caravans and RVs where supply arrangements can vary between sites. Isolating both poles reduces the chance of stray voltages on the neutral. It also aligns with typical caravan wiring practices in Australia.

Q: Can this outlet be used as part of a DIY 240V kit?

Yes, it is supplied as a component for DIY 240V kits but still requires licensed installation. The 20A coupler allows it to drop into compatible pre‑wired looms. The 10A socket rating keeps it suited to everyday loads like chargers and small appliances. Always follow the kit wiring diagram and local regulations.

Suitable for use in 240V installations where a 10A outlet with a 20A installation coupler is required. Fitment should be carried out by a licensed electrician in accordance with Australian electrical standards and any relevant caravan or RV wiring regulations.