The Can-SB tank filler nylon fuel resist 90° swivel elbow steps in when your fuel tank only has about 85 mm of room above it and the 1-1/2 inch hose still needs to turn. The 1-1/2 BSPF thread screws straight onto a matching tank boss and the barbed tail grabs standard 1-1/2 inch filler hose, so you can tackle tight corners without flattening the line.

The elbow uses fuel-resistant nylon with a full-bore 1-1/2 inch passage, so flow stays close to what the deck filler and hose can already handle. The swivel feature lets you clock the 90° outlet after the thread is pulled up, which helps line the hose towards the deck or gunwale on different hull layouts. It is straightforward gear that keeps marine fuel plumbing tidy and practical.

• Can-SB marine fuel tank filler elbow
• Fuel resistant nylon construction for longevity
• 90° elbow for tight installation spaces
• 1-1/2 BSPF threaded connection to tank
• 1-1/2 inch internal diameter hose tail
• Swivel design to adjust hose direction
• Requires 85 mm clearance above tank
• Suits common marine fuel filler hose sizes
• Compact fitting helps prevent hose kinks
• Ideal for deck fill to tank fuel runs

Q: What hose size does this elbow suit?

It suits hose with 1-1/2 inch internal diameter. This matches common marine fuel filler hose sizes used between deck fillers and tanks. Using the correct 1-1/2 inch ID hose keeps the bore consistent through the system. That helps maintain proper fuel flow during filling and reduces restriction at the bend.

Q: What thread is on the tank end of the fitting?

The tank end has a 1-1/2 BSPF thread. This thread type matches many marine fuel tank bosses and fittings that use British Standard Pipe connections. A 1-1/2 BSP male boss or adaptor is required on the tank. Always check the existing tank fitting size before ordering to avoid mismatched threads.

Q: How much clearance above the tank is required for installation?

The fitting needs 85 mm of clearance above the tank. This clearance allows the 90° elbow and hose tail to sit correctly once the fitting is threaded into the tank. Measuring available height before installation helps prevent interference with deck structures. In tight lockers this specification is important to plan hose routing.

Q: Is the body material suitable for fuel use?

The body is made from fuel resistant nylon. Fuel resistant nylon is commonly used in marine fuel systems for its compatibility with petrol and diesel. The material handles regular contact with fuel inside the hose connection. It also offers good strength relative to its weight which suits compact fittings near tanks.

• Suits fuel filler hose with 1-1/2 inch internal diameter
• Connects to tank port with 1-1/2 BSP female thread requirement
• Requires 85 mm minimum clearance above the tank for installation
• Intended for marine fuel tank setups and associated fuel hose routing