CalOffroad Landcruiser 200 Series Upper Control Arm Kit (UCA) - GVM Upgrade
The CalOffroad Toyota Landcruiser 200 Series upper control arm kit has a built-in caster and camber to help correct wheel alignment when adding a lift to your vehicle. The UCA kit also allows for more tyre-to-arm clearance and more arm-to-coil / chassis clearance. These arms are built to be stronger than OE and are designed for tough Australian conditions.
Our 200 Series UCA kits are suited for all weight applications and feature compliance for the maximum allowable GVM upgrades to axle loading of 2000kg. Full FEA compliance forms are available for engineer compliance.
Some of the many great features:
- GVM upgrade compliant to the maximum allowed GVM of 2000kg front axle loading
- Extended bump stops included
- Stronger than OE
- Built-in caster and camber
- E-coat then powder coated for more corrosion protection
- Corrects wheel alignment for improved tyre wear
- Increased wheel travel
- HD high-angle greasable ball joints
- Ball joint aperture can accept OE ball joints
- Long-life OE-style rubber bushes that are silent and maintenance-free
These control arms are a must for any lifted Landcruiser.
- Smart upgrade for lifted 200 Series gear
- Built tough arms with extra clearance
- GVM friendly up to 2000kg front axle
- Greasable ball joints ready for touring
- OE-style bushes for quiet long trips
- Coated finish that handles Aussie conditions
- Suitable vehicle: Toyota Landcruiser 200 Series
- Component type: front upper control arm kit (UCA)
- Front axle GVM compliance: up to 2000kg
- Alignment features: built-in caster and camber correction
- Clearance: increased tyre-to-arm and arm-to-coil / chassis clearance
- Finish: E-coat then powder coated for corrosion protection
- Ball joints: HD high-angle greasable type
- Ball joint aperture: accepts OE ball joints
- Bushes: long-life OE-style rubber bushes
- Included: extended bump stops
- 1 x pair CalOffroad upper control arms (left and right)
- 1 x set extended bump stops
- 1 x set HD high-angle greasable ball joints (pre-fitted to arms)
- 1 x set washers and spacers
- 1 x set castellated nuts and hardware
- 1 x set OE-style rubber bushes (pre-fitted to arms)
| SKU | UCALC200FV2 |
|---|---|
| Barcode # | OEBC699458 |
| Brand | CalOffroad |
| Shipping Weight | 10.0000kg |
| Shipping Width | 0.407m |
| Shipping Height | 0.150m |
| Shipping Length | 0.340m |
CalOffroad Upper Control Arm Kit, to suit Toyota Landcruiser 200 Series also suitable for maximum GVM upgrade
More infoMake 4 payments of $202.38 over 8 weeks and get it now!
Calculate Shipping
CalOffroad Landcruiser 200 Series Upper Control Arm Kit (UCA) - GVM Upgrade
The CalOffroad Toyota Landcruiser 200 Series upper control arm kit has a built-in caster and camber to help correct wheel alignment when adding a lift to your vehicle. The UCA kit also allows for more tyre-to-arm clearance and more arm-to-coil / chassis clearance. These arms are built to be stronger than OE and are designed for tough Australian conditions.
Our 200 Series UCA kits are suited for all weight applications and feature compliance for the maximum allowable GVM upgrades to axle loading of 2000kg. Full FEA compliance forms are available for engineer compliance.
Some of the many great features:
- GVM upgrade compliant to the maximum allowed GVM of 2000kg front axle loading
- Extended bump stops included
- Stronger than OE
- Built-in caster and camber
- E-coat then powder coated for more corrosion protection
- Corrects wheel alignment for improved tyre wear
- Increased wheel travel
- HD high-angle greasable ball joints
- Ball joint aperture can accept OE ball joints
- Long-life OE-style rubber bushes that are silent and maintenance-free
These control arms are a must for any lifted Landcruiser.
- Smart upgrade for lifted 200 Series gear
- Built tough arms with extra clearance
- GVM friendly up to 2000kg front axle
- Greasable ball joints ready for touring
- OE-style bushes for quiet long trips
- Coated finish that handles Aussie conditions
- Suitable vehicle: Toyota Landcruiser 200 Series
- Component type: front upper control arm kit (UCA)
- Front axle GVM compliance: up to 2000kg
- Alignment features: built-in caster and camber correction
- Clearance: increased tyre-to-arm and arm-to-coil / chassis clearance
- Finish: E-coat then powder coated for corrosion protection
- Ball joints: HD high-angle greasable type
- Ball joint aperture: accepts OE ball joints
- Bushes: long-life OE-style rubber bushes
- Included: extended bump stops
- 1 x pair CalOffroad upper control arms (left and right)
- 1 x set extended bump stops
- 1 x set HD high-angle greasable ball joints (pre-fitted to arms)
- 1 x set washers and spacers
- 1 x set castellated nuts and hardware
- 1 x set OE-style rubber bushes (pre-fitted to arms)
| SKU | UCALC200FV2 |
|---|---|
| Barcode # | OEBC699458 |
| Brand | CalOffroad |
| Shipping Weight | 10.0000kg |
| Shipping Width | 0.407m |
| Shipping Height | 0.150m |
| Shipping Length | 0.340m |
