The Camec Butt Hinge Nylon 51 mm keeps small caravan doors swinging without drama, with a compact footprint roughly 50 x 50 mm. Nylon construction means you do not add the weight of a metal hinge of the same 51 mm length, handy when the van is already nudging its 2500 kg limit. Six screw holes give more bite than a basic two-hole hinge, so cupboard doors stay lined up after long corrugated runs.

The hinge is moulded from solid nylon, so it shrugs off moisture that would rust a mild-steel hinge in coastal humidity above 60%. The catalog notes item height, length, and width all around 50 mm, which lines up well with standard caravan cabinet rails between 35 mm and 45 mm wide. You get simple, no-nonsense hardware that suits day-to-day use across typical caravan furniture builds.

• Camec nylon butt hinge for caravan use

• Compact overall length around 51 mm

• Catalog height listed as 50 mm

• Catalog length listed as 50 mm

• Catalog width listed as 50 mm

• Nylon construction to avoid metal corrosion

• Lightweight hardware ideal for RV cabinetry

• Six screw holes for secure fixing

• Suits small cupboard and access doors

• Simple hinge style for straightforward installation

Q: Is this hinge suitable for exterior caravan doors?

It is best suited to interior cupboard and access doors. The nylon construction handles moisture well but does not offer the same mechanical strength as a heavier metal hinge on large exterior doors. For main entry doors or heavy hatches, a larger stainless-steel hinge with a longer body and thicker knuckle is usually a better match.

Q: Can I use standard wood screws with this nylon hinge?

Yes, standard wood screws are commonly used. Match the screw diameter to the hinge holes so the shank fills the hole without forcing it. Pre-drill pilot holes in cabinet frames to avoid splitting timber, especially in narrow rails. Use stainless or coated screws to reduce rust marks around the hinge area over time.

Q: How many hinges are typically needed per cupboard door?

Most small caravan cupboard doors will use two hinges. A light door under about 600 mm high and made from thin board normally hangs well on a pair of 51 mm hinges. Taller or heavier doors may benefit from a third hinge to spread the load. Space the hinges near the top and bottom edges with even gaps for smooth operation.

Q: Can this hinge be painted to match my cabinetry?

Nylon can be painted with coatings suited to plastics. Clean the surface thoroughly before applying any coating so dust and oils do not interfere with adhesion. Use light coats rather than one heavy coat to avoid runs along the knuckle. Check a small test piece first to make sure the finish cures properly and does not crack under movement.