The Brink Towbar European for KIA Niro (04/2021 - 06/2019) gives your wagon a solid tow point for runabout trailers, bike racks or small box loads. The bar sits tight under the rear bumper so you still keep workable clearance on ramps and gutters. The fixed tongue keeps the towball at roughly 350–450 mm off the deck, which lines up with most light trailer couplings.

The cross tube and brackets use high-strength steel around 3 mm thick, so the kit can handle repeated towing within the Niro’s factory rating. Multi-bolt side plates tie into the body with several M10–M12 fasteners for good load spread over the chassis rails. A tough coating of about 50 μm helps fight off chips and surface rust from red dirt and coastal spray. It is a smart buy if you want proven European-style towing hardware on your small SUV.

• Brink European-style towbar assembly
• Suits KIA Niro models 06/2019–04/2021
• Fixed towball position for light towing
• Formed steel cross bar and brackets
• Multi-bolt mounting into factory points
• Coated finish for corrosion resistance
• Maintains practical rear ground clearance
• Compatible with trailer and rack use
• Purpose-built fitment for small SUV
• Suitable within vehicle’s rated tow capacity

Q: Does this Brink towbar suit all KIA Niro models?

This towbar suits selected KIA Niro models built between 06/2019 and 04/2021. Always check your build plate for the exact month and year before ordering. Different body updates can change mounting points and clearances. If your vehicle falls outside this range, you will need a different towbar kit made for that model run.

Q: Can I still use rear parking sensors with this towbar fitted?

In most cases the bar sits below the main sensor field so normal operation remains similar to stock. Some sensors may pick up the towball or a fitted hitch-mounted accessory at close range. You may notice extra beeps when reversing near walls. Many drivers simply learn the new beep pattern when towing or carrying racks.

Q: Will I need wiring to run trailer lights with this towbar?

Yes, you will need a vehicle-specific wiring harness or a universal loom to power trailer lights. The towbar itself only provides the mechanical mount point. Trailer plug wiring connects separately to the vehicle lighting circuits. A proper harness helps protect the car’s electronics when the trailer is plugged in.

Q: Does this towbar affect ground clearance at the back of the car?

The main bar tucks close under the bumper but it still reduces clearance slightly at the very rear. You may notice the change when exiting steep driveways or crossing sharp gutters. Most normal kerbs and ramps remain manageable with sensible approach speed. Take extra care when the vehicle is fully loaded or towing a trailer.

Suitable for KIA Niro built between 06/2019 and 04/2021.