The Brink Towbar European for KIA EV9 (00/2023 - on) bolts into the factory points so you can tow within the EV9 limits without messing around with custom brackets or drilling. You get a fixed European-style towball at a consistent height around 35 cm off the deck, which keeps box trailers and bike carriers sitting level when you head from the suburbs to the coast.

The main bar is steel with a wall thickness near 4 mm and a black protective coating that stands up to road grime, stone flick and wet weather. A welded plate carries the European-pattern towball and keeps the coupling load tight to the chassis rails, while an adjacent mount holds the trailer plug within about 10 cm of the ball. It is straightforward gear and a smart buy if you want your EV9 ready to tow around Australia.

• European-style fixed towbar assembly
• Suits KIA EV9 models from 00/2023-on
• Mounts to factory chassis points
• Solid steel crossbar construction
• Black protective coating for corrosion resistance
• Integrated plate for European towball mounting
• Provision for trailer plug socket near towball
• Compatible with bike racks using European ball
• Suitable for towing within EV9 rated limits
• Discreet fitment tucked beneath rear bumper

Q: Does this Brink towbar fit all KIA EV9 variants from 00/2023 on?

Yes, it is specified for the KIA EV9 from 00/2023 onward. That means all body and trim levels within that build range share the same rear mounting points for this bar. Always confirm your build date on the compliance plate before ordering. If your EV9 is earlier than 00/2023 this towbar will not be suitable.

Q: Is this a European-style towball setup or an Australian tongue-style hitch?

This is a European-style towbar with a fixed towball mount. The ball bolts directly to a flange plate rather than sliding into a square receiver. Many bike carriers and lighter trailers in Europe use this style. Check that your trailer coupling suits a European towball before fitting.

Q: Can this towbar be used with a standard trailer wiring kit?

Yes, the bar includes a mounting point for a trailer plug socket. Your auto electrician or installer can match the correct wiring kit and socket style to your EV9 and trailer. The socket sits close to the towball so cabling does not hang low. That helps keep the wiring clear of tyres and the road surface.

Q: Will the towbar affect rear ground clearance on my EV9?

The bar tucks up under the rear bumper so clearance change is minimal. The lowest point is generally the towball itself, which sits at a working height for trailers. When you drive steep driveways or tracks you still need to allow for the towball overhang. Driving line choice and speed will help avoid scraping in tight spots.

Vehicle compatibility: KIA EV9 from 00/2023 onwards.